Votes - 1, Average rating: 5 ( )

Manafacture: Drolet File size: 166.93 kb File name: 1b8004f5-477b-bc84-a56b-3b4ce81d1808.pdf Language of manual:

5. Turn the gas valve knob to the “ON” position. 6. Turn the face place mounted switch to the “ON” position. If you don’t have an additional wall switch , the main burner will come on. Otherwise, turn the wall switch to “ON” if you want the main burner to come on. 7. The other knob controls the gas flow and the power of the appliance. SHUTDOWN INSTRUCTIONS Main burner only : Turn off the face plate switch ( or wall switch ). To relight the main burner, turn the switch on ( or the wall switch ) Pilot and Main burners : Turn the gas valve to the “OFF” position. Depress the knob to pass from the “PILOT” to “OFF” position. FAN OPERATION : To turn the air blower “ON” or “OFF”, activate the face plate switch connected to the yellow wires. The fan will not start if the appliance is cold. Operate the gas insert for at least 15 minutes to heat up the thermo-switch. The fan will also turn itself off about 20 minutes after extinction of the main flame. Note: The speed control must also be on to allow fan to work. MAINTENANCE INSTRUCTIONS : TURN OFF THE GAS WITH THE SHUTDOWN VALVE AND THE ELECTRICAL POWER BEFORE SERVICING THE APPLIANCE. * The venting system and the gas insert should be inspected at least once a year. * Remove the glass front and the logs clean them if necessary. * The control compartment, air circulating passages, firebox, logs and burner should be cleaned at least once a year by vacuuming or brushing. * Check the pilot flame to see if it is adjusted properly. Re-adjust the pilot flame if necessary ( as described below ) or clean the pilot orifice if re-adjustment is not possible. * Check the burner for flame lifting or for usual flame pattern. If necessary clean the burner orifice. * Keep the area and the free from combustible materials, gasoline and other flammable vapors and liquids. PILOT BURNER ADJUSTMENT : The flame from the pilot should cover 3/8” to 1/2” of the power generator. If not, you need to do the following adjustment. 1. Remove the pilot adjustment cap on the gas valve. Depending on the valve model, the pilot adjustment screw could be indicated differently. 2. Adjust the pilot key to provide a properly sized flame. 3. Replace the pilot adjustment cap on the gas valve. OPTIONAL PARTS ITEM DESCRIPTION Part No QTY Face plate, silver gray enamel E5422 1 Face plate, black enamel E5420 1 Face plate, gold E5415 1 Face plate, charcoal painted E5416 1 Face plate, black painted E5418 1 Wall switch E5978 1 Remote control E5568 1 Decorative refractory kit E5988 1 REPLACEMENT PARTS ITEM DESCRIPTION Part No QTY Log kit 2232 1 Back log only 2232 BACK 1 Front log only 2232 FRONT 1 Top log, small only 2232 SMALL 1 Top log, holed only 2232 HOLED 1 Burner assembly 7950 1 Burner orifice (natural gas or propane) 49060 1 Pilot assembly (natural gas or propane) 49092 1 Thermopile 49091 1 Piezo igniter 49050 1 Gas valve (natural gas or propane) 49090 1 Glass 7916 1 Variable speed control 44080-44085 1 Blower 44070 1 Thermo-switch 44040 1 Rocker switch 44090 2 ____________________________ LIMITED 5 YEARS WARRANTY ____________________________ DROLET STOVES AND FIREPLACES INC. hereby warrants the quality of its fireplace gas insert against manufacturing defects. The product shall be delivered to the buyer in good condition and the latter should inform the vendor immediately of any defect in the product delivered. During the first year of the limited warranty, DROLET STOVES AND FIREPLACES INC. will provide free replacement parts for the fireplace gas insert except for the glass assembly. DROLET STOVES AND FIREPLACES INC. will cover labor related costs deemed reasonable by the company. All other costs related to dismantling the structure, decoration, venting system, etc. are the responsibilities of the fireplace gas insert owner. During the second to the fifth year of the limited warranty, DROLET STOVES AND FIREPLACES INC. will replace defective parts free of charge except the VALVE, IGNITION CONTROL, BURNER CONTROL. DROLET STOVES AND FIREPLACES INC. will not compensate for labor costs related to parts replacement. The warranty is conditional upon proper installation in accordance with manufacturer’s instructions. All repairs must be approved by an official representative of the company before being undertaken. The delivery costs of all replacement parts provided by DROLET STOVES AND FIREPLACES INC. are the responsibilities of the client. This warranty may not be transferred to a second person and becomes effective on the date the product is purchased. The warranty may not be extended in any way by your representatives, dealers or any other intervening party. No other claim of any nature whatsoever shall be considered by the vendor or manufacturer. DROLET STOVES AND FIREPLACES INC. 1700 Leon-Harmel Quebec (Quebec) Canada G1N 4R9 ...

Download now

Please, enter two numbers from picture: