Votes - 2, Average rating: 3.5 ( )

Manafacture: Lennox Hearth File size: 577.5 kb File name: Language of manual:

Do not attempt to substitute any materials used on this door assembly or replace cracked or broken glass with any other materials. NOTICE • Read all steps before starting installation. • These instructions must be left with the appliance. • All warnings, precautions, and instructions in the Installation Instructions and Care and Operation Instructions provided with the appliance also apply to these instructions. • If you encounter any problems, need clarification of these instructions, or are not qualified to properly install this kit, contact your local distributor or dealer. Figure 1 Classic Andirons Mission Andirons (2) provided Thumbscrews per Andiron (both styles) GENERAL INFORMATION These decorative andiron kits are offered in two attractive styles as an enhancement to the firebox appearance. Front View Montebello™ fireplace model shown. Instructions also apply to See-Through models. INSTALLATION INSTRUCTIONS (2) Door Latches ~ LENNO X HEARTH PRODUCTS • ANDIRON KIT FOR MONTEBELLO® GAS FIREPLACES • INSTALLATION INSTRUCTIONS Step 3. Fireplace models LSm40-2, LSm45-2, LSm40-PV, LSm45PV: Remove the front three logs indicated in Figure 3. Note:LogsareFRAGILE!Handlewithcaretopreventbreakage. For fireplace models LSm40ST and LSm40ST-PV: Log removal is not necessary. Figure 3 Fireplace models LSM40-2, LSM45-2, LSM40-PV, LSM45-PV: Remove front three logs before installing andirons. Step 4. Install andirons as described in Figure 4. To install andirons in montebello Front View fireplace models LSm40-2, LSm45-2, LSm40-PV and LSm45PV: 1) Loosen thumbscrews by turning them counterclockwise (do not remove thumbscrews). 2) Place andirons onto grate as shown above in Detail A and B. 3) Turn thumbscrews clockwise until snug (do not overtighten). Also see Figure 5. To install andirons in montebello See-Through fireplace models LSm40ST and LSm40ST-PV: 1) Remove thumbscrews by turning them counterclockwise. Discard thumbscrews. 2) Place andirons onto grate as shown above in Detail A. Also see Figure 6. Thumbscrew Andirons (Classic style shown) Grate Assembly Figure 4: Installing Andirons Grate Assembly DETAIL A ~~ DETAIL b Andiron (Classic style) (Side View) Step 5. Fireplace models LSm40-2, LSm45-2, LSm40-PV, LSm45PV: Reinstall the logs removed in Step 3. For details, refer to the log placement instructions in the fireplace Installation Instructions. Note:LogsareFRAGILE!Handlewithcaretopreventbreakage. Step 6. See Figure 2.Reinstall the front glass door assembly, as follows: a. Retrieve the glass door assembly. Visually inspect the gasket on the backside of the frame to ensure it is clean, free of irregularities, and firmly seated on the frame. b. Position the door assembly in front of the firebox opening with the top of the door held away from the fireplace, as shown in Figure 2. Lower the bottom of the door assembly onto the bottom door track. Pivot the door up after engaging and centering in the base channel. c. Using a Phillips screwdriver, fasten the doo...

Download now

Please, enter two numbers from picture: