Votes - 4, Average rating: 4
(
)
)
|
manual abstract
25. Keep all electrical cords away from a hot fireplace. 26. All surfaces of this outdoor fireplace are hot when in operation. To avoid burns, do NOT touch fireplace until it has completely cooled unless you are wearing protective gear (Potholders, gloves, BBQ mittens, hot pads & etc.). Never touch ashes or coals to see if they are hot. 27. Do NOT leave a lit outdoor fireplace unattended, especially around children and pets. 28. Do NOT attempt to move or store this outdoor fireplace until all ashes and coals are completely extinguished. 29. Do NOT remove ashes or coals until they are completely and fully extinguished. 30. Use heat-resistant gloves or hot pads when contacting handles and air vents. 31. Use long, sturdy fireplace tools when adding or moving logs. 32. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grate. Do NOT load firewood into the chimney. 33. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the base, hood or spark guards of this outdoor fireplace are glowing red it is overloaded. 34. Make sure all doors can completely close before starting a fire. 35. Do NOT lean over this outdoor fireplace when lighting or when in use. 36. Do NOT place hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 37. Avoid breathing smoke from the fire and avoid getting it into your eyes. 38. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. 39. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. 40. Do NOT use pressure washer to clean. 41. Use only Blue Rhino Global Sourcing, LLC factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Contact 1.800.762.1142. 42. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Exploded View 1 Finial 2 Top 3 Hood 4 Back Spark Guard 5 Right Spark Guard 6 Left Spark Guard 7 Spark Guard Door 8 Handle* 9 Wood Grate 10 Ash Receiver 11 Ash Receiver Handle* 12 Base *Pre-assembled 10 9 12 8 1 2 3 4 5 6 7 11 Hardware A Screw 11 pcs M5x10 Black Nickel Plated Phillips Truss Head Screw B Wing Nut 7 pcs M5 Black Nickel Plated Wing Nut Tool Needed C Screwdriver** 1 pc ** Not shown at actual size Outdoor Fireplace Model No. WAF501C Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free Please have your owner’s manual and serial number available for reference . For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings • Clear an area large enough to layout all components and hardware • When applicable, tighten all hardware connections by hand first Once the step is completed, go back and fully tighten all hardware . • Follow all steps in order to properly assemble your product Step 1 Attach left and right spark guards A Attach left spark guard to base using 3 screws (A) B Attach right spark guard to base using 3 screws (A) Attach back spark guard A Attach back spark guard to left and right spark guards by inserting side spark guard pegs into keyholes in back spark gard B Slide back spark guard down C Secure to base using screw (A) Step 3 Attach spark guard door Insert spark guard door pegs onto right spark guard Step 4 Assemble top A Screw finial into top B Attach top to hood using 4 screws (A) Attach hood assembly Attach hood assembly to spark guards using 7 wing nuts (B) Step 2 Step 5 page no Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Insert ash receiver and wood grate Insert ash receiver and wood grate into base Step 6 Step 7 Completed Congratulations your assembly is now complete Read Operating Instructions before proceeding page no Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Operating Instructions WARNING FOR YOUR SAFETY Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1 Make sure there is no more than a small amount of ash in the bottom of the ash receiver 2 Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate 3 Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 14” 4 Use a match to light kindling or firestarter 5 Close doors once the kindling or firestarter is lit Tending the Fire You may need to shift and/or add logs for an ideal experience Reminders: • Always wear protective gloves or a pot holder when tending a fire • ...