Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
Order P/N 775,212CF. Ce manuel d’installation est disponible en francais, simplement en faire la demande. Numero de la piece 775,212CF. Performer™ C210 Performer™ CA210 These appliances must be properly installed and operated in order to prevent the possibility of a house fire. Please read this entire installation and operation manual before installing and using your wood stove. Failure to follow these instructions could result in property damage, bodily injury or evendeath.Contactyourlocalbuildingorfireofficialstoobtain a permit and information on any installation requirements and inspection requirements in your area. WARNINGS • Hot! Do not touch! The glass and surfaces of this appliance will be hot during operation and will retain heat for a while after shutting off the appliance. Severe burns may result. • Carefully supervise children in the same room as appliance. Contents testing information .........................................................................3 general safety PreCautions ................................................................3 Drafting .....................................................................................4 negative Pressure Warning ...........................................................4 Creosote.....................................................................................4 ash DisPosal ................................................................................5 fuel..........................................................................................5 Break-in PerioD .............................................................................5 Paint Curing.................................................................................5 BriCk installation ...........................................................................6 requireD ClearanCes ........................................................................7 Chimney requirements.......................................................................8 installation ProCeDures-masonry Chimney ................................................8 installation ProCeDure - faCtory-Built Zero ClearanCe firePlaCes ......................9 firePlaCe Pre-installation PreParation ....................................................9 insert Pre-installation PreParation ........................................................9 Chimney liner installation ................................................................10 installing the insert ...................................................................... 10 Post installation CheCks.................................................................. 10 oPerating hints ........................................................................... 11 starting anD maintaining a fire .......................................................... 12 Clean glass ............................................................................... 13 oPerating teChniques anD hints .......................................................... 13 getting the most out of your stove .................................................... 13 maximiZing your stove’s overall effiCienCy .............................................14 aChieving Clean, long Burns ............................................................. 14 maintenanCe ............................................................................... 15 trouBleshooting........................................................................... 16 Do’s anD Don’ts........................................................................... 17 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. testing information This manual describes the installation and operation of the Performer™ C/A210 non-catalytic wood heaters. These heaters meet the U.S. Environmental Protection Agency’s emissions limits for wood heaters sold on or after July 1, 1990. This heater has been developed, tested and constructed in accordance with the requirements of UL 1482, ULC S628-93 and HUD standards and is listed by OMNI Test Laboratories, Beaverton, OR. It has been approved for residential and alcove installations. general safety PreCautions 1. When this room heater is not properly installed, a housefiremayresult.Toreducetheriskoffire,follow the installation instructions. Contact local building or fire officials about restrictions and installation inspection requirements in your area. 2. Wear gloves during installation to avoid injury from sharp edges on the stove and/or its parts. 3. This unit is designed and engineered to burn only dry, well-seasoned wood. Burning wet wood will greatlyreduceyourstovesefficiency,produceexcessive amounts of smoke, and can cause dangerous chimney fires due to creosote build-up. 4. Before opening the door, the draft control must be fullyopentoavoidpossiblecombustionflash (ignition of hot volatile gases as the door is opened). 5. Do not use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid...