Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
918-665a FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT. The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area. Keep those REGENCY FIRES burning. SAFETY NOTE: If this Insert is not properly installed, a house fire may result. For your safety, follow the installation instructions, contact local building or fi re officials about restrictions and installation inspection requirements in your area. The authority having jurisdiction (such as municipal building department, fi re department, fire prevention bureau, etc.) should be consulted before installation to determine the need to obtain a permit. I1200 Regency Wood Insert TABLE OF CONTENTS SAFETY LABEL Safety Label...................................................................4 UNIT DIMENSIONS With Standard Flue Adaptor ..........................................5 With Offset Flue Adaptor ...............................................6 INSTALLATION Before Installing your Insert ...........................................7 Chimney Specifi cations .................................................7 Fireplace Specifi cations.................................................7 Masonry and Factory Built Fireplace Clearances .........8 How to Determine if Alternate .......................................... Floor Protection Materials are Acceptable .....................8 Installing your Insert ......................................................9 Installation into a Masonry Fireplace ...........................10 Installation into a Factory Built Fireplace .....................10 Faceplate, Trim & Optional Fan Support Installation ...11 Fan / Blower ................................................................15 Firebrick Assembly ......................................................16 Draft Control ................................................................16 Door Handle ................................................................16 Brick Flue Baffle & Secondary Air Tube Installation ....16 Screen Door ................................................................17 OPERATING INSTRUCTIONS First Fire ......................................................................17 Fan Operation..............................................................18 Ash Disposal................................................................18 Some Safety Guidelines ..............................................18 MAINTENANCE Creosote ......................................................................18 Maintenance of Gold-Plated Doors .............................19 Door Gasket ................................................................19 Door Latch Adjustment ................................................19 Glass Cleaning ............................................................19 Glass Replacement .....................................................19 Glass Removal ............................................................19 PARTS LIST Main Assembly ............................................................20 Faceplates ...................................................................21 Firebrick .......................................................................22 WARRANTY Warranty ......................................................................23 I1200 Regency Wood Insert SAFETY LABEL (Duplicate Serial #) This is a copy of the label that accompanies each I1200S Wood Insert. We have printed a copy of the contents here for your review. NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one. LISTED FACTORY BUILT FIREPLACE INSERTCERTIFIED FOR USE IN CANADA AND U.S.A. MODEL: I1200STESTED TO:ULC S628-M93 / UL 1482-1998 / ULC S627-00 / UL 737-2000 REPORT NO. 632-3198 (SEPT.1993) DO NOT REMOVE THIS LABEL326 COMPONENTS REQUIRED FOR INSTALLATION: 6IN / 150MM STAINLESS STEEL LINER. STANDARD ADAPTOR (171-932) OR OFFSET ADAPTOR (171-936) OPTIONAL COMPONENT: FAN (170-915), ELECTRICAL RATING: VOLTS 115, 60 HZ, 0.6 AMPS, SCREEN DOOR (846-101) DO NOT REMOVE BRICKS OR MORTAR IN MASONRY FIREPLACE. FOR USE WITH SOLID WOOD FUEL ONLY. DO NOT USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. OPERATE WITH FEED DOOR CLOSED, OPEN TO FEED FIRE ONLY. REPLACE GLASS ONLY WITH CERAMIC GLASS (5MM). INSPECT AND CLEAN CHIMNEY FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE CREOSOTE BUILDUP MAY OCCUR RAPIDLY. DO NOT OVERFIRE, IF INSERT GLOWS YOU ARE OVER-FIRING. MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS (MEASURED FROM INSERT BODY) INSTALL ONLY ON A NON-COMBUSTIBLE HEARTH RAISED (F) 1.5IN / 38MM ABOVE AN ADJACENT COMBUSTIBLE FLOOR. COMBUSTIBLE FLOORMUST BE PROTECTED BY NON-COMBUSTIBLE MATE...