Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
REVISED APRIL, 2009 (BL) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. (FOR MODELS MANUFACTURED SINCE 10/04) CA6450# PRINTED IN TAIWAN A WARNING! This manual provides critical safety instructions on the proper setup, operation, maintenance and service ofthis machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and comprehension, application of safety devices, blade/cutter integrity, and the usage of personal protective equipment. The manufacturer will not be held liable for injury or property damage from negligence, impropertraining, machine modifications or misuse. A WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement and other masonry products. • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: Work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Table of Contents INTRODUCTION...............................................2 Manual Accuracy...........................................2 Contact Info....................................................2 Machine Description......................................2 Identification...................................................3 G0568 Machine Data Sheet..........................4 G0569 Machine Data Sheet..........................6 SECTION 1: SAFETY.......................................8 Safety Instructions for Machinery..................8 Additional Safety Instructions for Bandsaws 10 SECTION 2: CIRCUIT REQUIREMENTS......11 440V Conversion.........................................12 SECTION 3: SETUP.......................................13 Needed for Setup.........................................13 Unpacking....................................................13 Inventory......................................................14 Hardware Recognition Chart.......................15 Cleanup........................................................16 Site Considerations......................................17 Moving & Placing Base Unit........................18 Mounting to Shop Floor...............................19 Riser Blocks.................................................19 Fence...........................................................20 Handwheel...................................................20 Dust Collection.............................................21 Blade Tracking.............................................21 Power Connection........................................23 Test Run......................................................24 Table Stop Calibration.................................26 Table Tilt Calibration....................................26 Aligning Table..............................................27 Aligning Fence.............................................28 Pointer Calibration.......................................29 Miter Gauge.................................................29 Tensioning Blade.........................................30 Adjusting Blade Guide Bearings..................30 Adjusting Support Bearings.........................32 SECTION 4: OPERATIONS...........................34 Overview......................................................34 Foot Brake...................................................35 Key Switch...................................................35 Guide Post...................................................36 Ripping.........................................................36 Crosscutting.................................................37 Resawing.....................................................37 Cutting Curves.............................................38 Blade Lead...................................................38 Table Tilt......................................................39 Stacked Cuts................................................39 Blade Information.........................................40 Blade Changes............................................42 SECTION 5: ACCESSORIES.........................43 SECTION 6: MAINTENANCE...................
Other models in this manual:Fish Finders - G0569 (6.9 mb)
Fish Finders - G0568 (6.9 mb)