Votes - 0, Average rating: 0
(
)
)
|
manual abstract
People with a reduced immune response or people who suffer from diabetes mellitus, haemophilia or immunodeficiency should also consult their doctor first. -- Your skin may become a little red and irritated the first few times you use the epilator. This phenomenon is absolutely normal and quickly disappears. As you use the appliance more often, your skin gets used to epilation, skin irritation decreases and regrowth becomes thinner and softer. If the irritation has not disappeared within three days, we advise you to consult a doctor. -- Use and store the epilator at a temperature between 10°C and 30°C. -- Noise level: Lc = 72 dB(A). Compliance with standards This Philips appliance complies with all standards regarding electromagnetic fields (EMF). Using the appliance Note: Clean the epilating head and shaving head before first use. Epilation tips -- Epilation is easier just after taking a bath or shower. Make sure your skin is completely dry when you start epilating. -- Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating. -- Epilation is easier and more comfortable when the hair has the optimum length of 3–4mm. If the hairs are longer, we recommend that you shave first and epilate the shorter regrowing hairs after 1 or 2 weeks. -- When you epilate for the first time, we advise you to epilate in the evening, so that any reddening that develops can disappear overnight. -- To relax the skin, we advise you to apply a moisturising cream after epilation. Connecting the appliance 1 Insert the appliance plug into the appliance (Fig. 5). 2 Insert the adapter into the wall socket. Epilating the legs If you are new to epilation, we advise you to start epilating with the efficiency cap. It ensures ideal contact with the skin so that the hairs are removed effectively in one stroke. Register your product and get support at 4203.000.7031.1 HP6403/00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Put the efficiency cap on the epilating head (Fig. 6). Select the desired speed to switch on the appliance (Fig. 7). 1 2 Preferably use speed II. Switch to speed I for areas with little hair growth, for hard-to-reach areas and for areas where bones are located directly beneath the skin, such as knees and ankles. 3 Stretch the skin with your free hand to make the hairs stand upright. Place the epilator in a 90° angle onto the skin with the on/off slide pointing in the direction in which you are going to move the appliance (Fig. 8). 4 Move the appliance slowly over the skin, against the direction of hair growth. (Fig. 9) - Press the appliance lightly onto the skin. shaving the underarms and bikini line You can use the shaving head to shave the delicate par ts of your body, such as the underarms and bikini line areas. With the shaving head, you obtain a smooth result in a comfor table and gentle way. 1 2 3 Push the epilating head in the direction of the arrow (1) and remove it from the appliance (2) (Fig. 10). Place the shaving head on the appliance (1) and push it in the direction of the arrow (2) until it snaps home (Fig. 11). Switch on the appliance. -We advise you to select speed I. 4 Stretch the skin with your free hand to make the hairs stand upright. Place the appliance in a 90° angle onto your skin, with the on/off slide pointing in the direction in which you are going to move the appliance (Fig. 12). 5 Move the appliance slowly over the skin against the direction of the hair growth while pressing it lightly. -Shave your bikini line as shown in the figure (Fig. 13). -Shave your underarms as shown in the figure (Fig. 14). Cleaning and maintenance Note: Make sure the appliance is switched off and unplugged before you start to clean it. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. -Never rinse the appliance or the adapter under the tap (Fig. 15). -Keep the appliance and the adapter dr y (Fig. 16). Cleaning the epilating head and efficiency cap 1 Remove the efficiency cap from the epilating head (Fig. 17). Push the epilating head in the direction of the arrows on the back of the appliance (1) and remove it (2) (Fig. 10). Rinse the epilating head and the efficiency cap under the tap while turning it. Shake the epilating head firmly (Fig. 18). Dry the epilating head thoroughly with a tea towel. 2 3 4 5 Note: Make sure the epilating head and the efficiency cap are completely dry before you place them back onto the appliance. 6 Place the epilating head back onto the appliance (1) and push it against the direction of the arrows indicated on the back of the appliance (2) until it snaps back into position (‘click’) (Fig. 19). Cleaning the shaving head 1 Switch off the appliance. 2 Remove the adapter from the wall socket (1) and pull the appliance plug out of the appliance (2). 3 Push the shaving head in the direction of the arrow (1) and remove it from the appliance (2...