Login:
Votes - 4, Average rating: 3.8 ( )

User manual Panasonic, model ES2067

Manafacture: Panasonic
File size: 1.23 mb
File name: ES2067-MUL.PDF
Language of manual:enesfr
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


If you use the charger in temperature outside of the recommended range, the following problems might occur. -The time it takes to charge the appliance increases. (approximately 3 hours) -The charger stops functioning. • If you use the charger in low temperature, the battery life might be reduced. • The charger is intended to be correctly oriented in a vertical or floor mount position. • If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. Using Using Wet/foam epilation Do not use the epilation head for legs/arms to epilate your underarms and bikini-line. Trim your hair before epilating for the first time or if you have not epilated for a long time. The recommended use temperature is 5-35 °C (41-95 °F). If you use the appliance in temperature outside of the recommended range, it may stop functioning or might reduce the operating time. 1. Wet your skin. 2. Remove the cap (only the epilation head for underarms/ bikini-line). 3. Wet the discs and place a small quantity of liquid body soap on the discs. 4. Press the 0/1 switch to turn on the power and then epilate. • Foam makes the epilator slide better, so you can move it fast. Always wash the discs well after use to remove any residual soap. Dry epilation You can also epilate without wetting your skin or the discs. For best epilation resultsUsing Apply the epilator at a right angle to your skin and press gently while moving it slowly against the hair growth, or your skin may be damaged. 90° 90° When using the appliance, pull your skin taut where the area is prone to sagging (on the inside of the knees and elbows). Rub your skin to lift short hair. Do not remove the frame of the epilation head. Please shave your hair with shaver head to no longer than 5 mm. Reddening might appear for your first use. Cool towel will help if you feel pain or there is a rash. We recommend regular use of massage sponges or exfoliation to prevent ingrown hair. English English Moving directions Move freely in any direction. Move in several directions as underarm hair grows in different directions. Move the epilator with the side that has the foam keeper facing the front. Wet/foam shaving Shaving 1. Attach the shaver head. 2. Wet your skin. Shaving with soap lather makes the skin slippery for a closer shave. Do not use shaving cream, skin cream or skin lotion as it will clog the blades. 3. Press the 0/1 switch to turn on the power. Hair removal is easier and less painful when the hair is short. Slide the pop-up trimmer switch up to cut long hair. Press gently so that the whole of the blade is in close contact with the skin and the surface of the blade does not move up and down. Shaving the bikini-line with the bikini comb Place the bikini comb onto the shaver head and slide trimmer up. When the bikini comb is in place, make sure the comb is in close contact with the skin. Dry shaving • You can also shave without wetting your skin or the head. Cleaning Cleaning the epilator Switch off and unplug the appliance before cleaning. Always unplug the charger from a household outlet and from the epilator before cleaning the appliance. Wipe the main body only with a dry cloth. The use of alcohol etc. might cause discoloration or deformation of the main body. When storing the epilator, always attach the protection cap for the epilation head for underarms/bikini-line, and the bikini comb for the shaver head and put the epilation head for legs/arms on the stand. Washing your epilator Always clean the frames and discs after use to keep them in a hygienic state. 9 English Take care not to damage the fl oat guard/the skin protector during cleaning. 1 . . 2-4 1. Remove the frame by pushing the frame release button. 2. Apply liquid hand soap to the discs and blade. 3. Turn the switch on and then wet the discs to create foam. 4. Wash the head with water to clean hair. Do not use hot water. If soap is not completely washed away, then a white deposit can accumulate and prevent the blades from moving smoothly. 5. Turn the switch off, wipe the appliance with a dry cloth and dry it well. Cleaning your epilator with the supplied brush You can also clean the epilation head and the shaver head with the cleaning brush. • •• Replacing Replacing the outer foil Replace the shaving foil and the inner blade when you notice reduced Replacing the outer foil Replacing Replace the shaving foil and the inner blade when you notice reduced English shaving performance. Never remove the outer foil of the shaver head for any other reason than to change it. Removing the outer foil While pushing the outer foil gently with the fingers, use a fingernail to release the plastic panel . on the blade from the catches . on the inside of the frame. .. Fitting the new outer foil Hold the outer foil so that the surface with the plastic panel . (i.e. the surface that will come into contact with the inner ...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category