Votes - 3, Average rating: 4 ( )

Manafacture: Scarlett File size: 202.87 kb File name: Scarlett-SC-1152-SC-1153-SC-1154-Pdf-Rus.Pdf Language of manual:

Photos and specs  Scarlett  SC-1152

Pull on the plug, not on the cord. • Do not use out of the room. • Do not insert and pull out the plug with wet hand, as this may cause electrical shock. • The oil heater must be used only in the upright position. • The unit should be far away from the object flammable or easy deformated objects during uses. • Surface temperature of the appliance is high, thus do not touch it, except the handle. CAUTION: • Do not cover the appliance when is use. • Do not operate without castors attached. 2 ASSEMBLING First put the unit upside down. Install multidirectional rolling wheels to each end between the first and the second groups of the radiating flanges. Let the “U” shape screw surrounding the dome of the radiating flanges. Then insert it into two holes of the supporting plate. Insert the butterfly nuts and screw them tightly counter clockwise. USING THE APPLIANCE • Set the thermostat to the minimal position and power switch knob to the “0” position, insert the plug to the power supply. POWER SWITCH KNOB • You can adjust power of work of an oil heater, using power switch knob: - O - Off; - “1“ - minimal power; - “II” - medium power; - “III” - maximal power. THERMOSTAT • Set the power switch knob to “III” position thus the pilot light should light up. • Set the thermostat to the maximum position. • When the temperature rises to which you are satisfied with, slowly turn the thermostat counterclockwise until the pilot light is out, and the room temperature thus can keep constant. • If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to rise the temperature and counterclockwise to lower it, or turn the power switch knob to the “I” or “II” position. • The pilot light will be on only if the temperature is below the setting value of the thermostat. NOTES: • The room must be sealed in good condition, if not, it will not make good result because of the influx of heat. • After use, turn the power switch knob to the “0” position and turn the thermostat to the minimal position and unplug from power supply. MODEL POWER REGULATION RANGE (W) SUITABLE FOR AREA (m2) SC-1152 600/900/1500 15 SC-1153 800/1200/2000 18 SC-1154 1000/1300/2300 23 3 CLEAN AND CARE • The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this may result the radiating efficient. • Unplug from the power supply and allow the appliance to cool down. • Wipe out with a soft damp cloth. Do not use detergent or abrasives. • Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat. STORAGE • Ensure the oil heater is completely cool. • Store the appliance in a cool, dry place. SPECIFICATION Power supply 230 V, 50 Hz Power SC-1152 1500 W SC-1153 2000 W SC-1154 2300 W Net/ Gross weight: SC-1152 9.65 kg / 10.55 kg SC-1153 11.75 kg / 12.95 kg SC-1154 13.90 kg / 15.20 kg Radiating fins quantity: ...

Download now

Please, enter two numbers from picture: