Votes - 2, Average rating: 5 ( )

Manafacture: Kambrook File size: 161.66 kb File name: Language of manual:

• Do not operate any heater with a damaged cord or plug, or if heater has been dropped or damaged in any manner. Return heater to your nearest service centre for examination, electrical or mechanical adjustment or repair. • Do not use outdoors. • This heater is not intended for use in wet or moist locations such as bathrooms or laundry areas. DO NOT IMMERSE or allow liquids to be spilt on heater. • Place unit well clear of heat sensitive surfaces and where necessary place on a suitable stable inflammable surface. • Do not run the cord under carpeting or cover the cord with rugs, runners or the like.Arrange cord away from traffic areas and where it will not be tripped over. sides) and do not block air inlets or outlets in any manner. Check the elements and grill from time to time for accumulated dust. • To disconnect heater switch the control setting to the OFF position, then switch off at the power outlet prior to removing the plug from its outlet. • Do not insert or allow foreign objects to pass through the element guard as this may cause an electric shock, fire or damage the heater. • Do not touch hot metal surfaces. • Do not allow power cord to contact hot metal surfaces. • Set the control setting to the OFF position then Unplug and allow heater to cool down before cleaning or storing. • The heater will not operate unless it is placed on a flat level surface as it is fitted with a tilt switch. • Do not use the heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. • Use this heater only as described in this instruction manual.Any other use not recommended by the manufacturer may cause fire, electric shock or injury and voids all warranties. • Always move the heater with the handle provided. • Do not operate the heater with the cord hanked or wound around any part of the heater or in contact with heated sufaces of the heater. 2 HOW TO OPERATE 1. Remove your heater from the packaging, unwind the cord to its full length. 2. Read all the instructions fully before plugging the unit in. 3. Place the heater on a level surface in a stable position. Make certain the heater element control switch is in the OFF position. 4. Remove any element support Guards (ie Foam or paper packing). 5. Plug the power cord in a 240Volt outlet, and switch the power outlet on. 6.The heater control panel is located at the right hand side of the unit, underneath the plastic flap (for safety). 7.To operate the control dial,lift the plastic flap. Use the control dial to switch the heater to the desired setting. TEMPERATURE SETTING 1. Model Numbers KRH150 & KRH200 KRH150 & KRH200 have 2 temperature settings. Setting 1 – Turn the control dial to the low setting to heat the lower element only. Setting 2 – Turn the control dial to the high setting to heat both elements. 2. Model Number KRH240 KRH240 has 3 temperature settings Setting 1 – Turn the control dial to th...

Download now

Please, enter two numbers from picture: