Login:
Votes - 0, Average rating: 5 ( )

User manual White Rodgers, model 3L09

Manafacture: White Rodgers
File size: 13.93 kb
File name: 0037-6133.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


A small bimetal sensing element is located in the air switch that opens on temperature rise to limit the maxi- stream for quick response. These controls have a fixed mum allowable temperature in forced air heating sys- temperature setting and fixed differential. THIS CONTROL MUST BE INSTALLED BY A QUALIFIED INSTALLER. All wiring must conform to local and national electrical codes and ordinances. This control is a precision instrument, and should be handled carefully. Rough handling or distorting components could cause the control to malfunction. This control has been accurately calibrated at the factory. Any attempt to re-calibrate this control will void the White-Rodgers warranty. A WARNING Do not use on circuits exceeding specified voltages. Higher voltages will damage control and could cause shock or fire hazard. If in doubt about whether your wiring is millivolt, low or line voltage, have it inspected by a qualified heating and air conditioning contractor or a licensed electrician. PRECAUTIONS A CAUTION To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete. Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Following installation or replacement, follow appliance manufacturers’ recommended installation/service instructions to insure proper operation. SPECIFICATIONS ELECTRICAL RATING: Resistive: 15 amps @ 120 VAC 13 amps @ 240 VAC 9.3 amps @ 277 VAC Inductive: 5.8 FLA, 34.8 LRA @ 120 VAC 2.9 FLA, 13.0 LRA @ 240 VAC Pilot Duty: 278 VA Temperature Setting: Fixed setting stamped on control INSTALLATION This control must be mounted in the air stream of the appliance. Follow the original equipment manufacturers’ recommendations for proper location and wiring. Wiring All wiring must conform to local and national electrical codes and ordinances. WHITE-RODGERS DIVISION EMERSON ELECTRIC CO. 9797 REAVIS ROAD isMisnsoN ST. LOUIS, MISSOURI 63123-5398 Printed in U.S.A. PART NO. 37-6133A 9949...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category