Manafacture: Vermont Casting
File size: 948.87 kb
File name: a7f22508-7947-46df-94ce-39687b6499d6.pdf
|
manual abstract
Keep this manual with the heater after installation is complete. FOR SAFE INSTALLATION AND OPERATION, PLEASE NOTE THE FOLLOWING: 1. Use only Natural Gas with UVS27RN/MN. Use only Propane with UVS27RP/MP. Do not use any other fuels. 2. Install only in accordance with the National Fuel Gas Code, ANSIZ223.1/NFPA54-latest edition. (Exception: Do not derate this appliance for altitude. This appliance has been tested and listed for use in altitudes up to 10,000 feet.) 3. Use only the installation instructions provided by the manufacturer for this appliance. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways of the appliance be kept clean. 4. Warning: Any change to this heater or its controls can be dangerous. DO NOT make modifications to any heater or associated parts. 5. DO NOT install this heater in a bedroom or bathroom. 6. Due to high surface temperatures, DO NOT install this heater • in a recreational vehicle, • where curtains, furniture, clothing or other flammable objects are less than 36 inches from the front, top or sides of the heater, • in high traffic areas, • in windy or drafty areas. CARBON MONOXIDE POISONING MAY LEAD TO DEATH! Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have the heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes. 7. DO NOT place clothing or other flammable material on or near the appliance. 8. DO NOT obstruct the top grille at all. Doing so will cause high levels of carbon monoxide that will lead to death. 9. This heater needs fresh, outside air ventilation to operate properly. See Fresh Air Requirements on pages 6 and 7. 10. If heater shuts off, heater may not have enough fresh air ventilation. Provide more fresh air. If heater keeps shutting off, refer to Troubleshooting. 11. DO NOT operate this heater • where flammable liquids or vapors are used or stored • under dusty conditions. 12. The heater becomes very hot when operating. Alert children and adults to stay away from hot surfaces to avoid burns or clothing ignition. The heater will remain hot for a time after shutdown. Allow surface to cool before touching. 13. Carefully supervise young children when they are in the room with the heater. 14. Do not use the heater if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water. 15. DO NOT operate the heater if any log is broken or damaged. 16. Turn heater off and let cool before servicing. Only a qualified service person should service and repair heater. 17. DO NOT operate this appliance with the safety screen removed. If the safety screen is removed from the appliance for service or cleaning, it must be replaced before operating the heater. NOTE: If any of the original wire as supplied with the appliance must be replaced, it must be replaced with a wire of at least 105°F temperature rating. UVS27 Vent-Free Gas Heater Shell Dimensions Drawing Not to Scale Freestanding Stove 26......" (680 mm) CL CL 9" (229 mm) 25" (635 mm) 3" (76 mm) Valve Inlet Valve Inlet 14......" (368 mm) 15......" (379 mm) 7068 Fig. 1 UVS27 freestanding shell dimensions. CL5" (140 mm) 25......" (641 mm) 26......" (673 mm) .........." (416 mm) 5004 Drawing Not to Scale Hearthmount Fig. 2 UVS27 Hearthmount specifications. Clearance Requirements Minimum Clearances to Combustible Materials UVS27 Vent-Free Gas Heater Maintain clearance, (empty space), between combustible materials and the heater as specified below for the appropriate firebox shell being installed. S D T U V W X Y Z A B C E F G H ST599a Ref. Mantel Shelf Depth Ref. Mantel from Stove Top A 13” (330mm) S 35” (889 mm) B 11...” (286 mm) T 30” (762 mm) C 9...” (241 mm) U 25” (635 mm) D 7...” (191 mm) V 20” (508 mm) E 5...” (146 mm) W 15” (381 mm) F 4” (102 mm) X 10” (254 mm) G 2...” (57 mm) Y 5” (127 mm) H 1” (25 mm) Z 2” (51 mm) Hearth Requirements The Freestanding Stove and Hearthmount Shell must be installed on rigid flooring. If the appliance is installed on any combustible surface other than wood flooring, such as carpet or tile, a metal or wood panel must be installed to extend the full length and width of the unit. B A C D B A C D Freestanding Stove Hearthmount ST101 ST102 A: Mantel/Trim*.........................35” (889 mm) / 2” (51 mm) B: Side Wall/Trim*...........
Other models in this manual:Electric Heaters - 4040 - 4046 (948.87 kb)
Electric Heaters - 4085 - 4087 (948.87 kb)
Electric Heaters - 4090 - 4092 (948.87 kb)