Votes - , Average rating:
(
)
)
Manafacture: Vitek
File size: 389.97 kb
File name: Vitek-VT-1737-Pdf-Rus.Pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
ALWAYS unplug when not in use. 2.2 A heater should never be used under conditions where it may be immersed, or come in contact with water. Similarly do not plug in your heater if its surfaces are damp, 2.3 Do not insert foreign objects through the intake or discharge grilles. 2.4 Do not operate the heater with a damaged cord-set, or if it has been dropped, or damaged in any manner. Return it to an Authorized Service facility for inspection, repair and testing. 2.5 Close supervision is required when any appliance is used by or near children. 2.6 Disconnect the cord from the outlet before cleaning. 2.7 Unplug heater by grasping plug and pulling it from the outlet 2.8 When storing your heater, keep it in a cool, dry place. 3. To reduce hazard of injury or property damage due to heat, fire, or explosion: 3.1 Position your heater away from furniture or loose hanging materials. Do not drape clothing or towels, etc, over the heater to dry. 3.2 Keep the rear grille out from walls or drapes so as not to block the ail intake. 3.3 Use of an extension cord is not recommended. However, if it is absolutely necessary ensure the cord is short as possible (long cords coiled up can overheat, as well as cause tripping accidents). 3.4 Do not use in the presence of explosive or flammable vapor. 3.5 Do not run in locations when the heater will be left unattended for long periods of time. (For example - several weeks in an unoccupied summer cottage). 3.6 Use the heater on flat, dry surfaces only. 3.7 Loose connections between the heater plug and the electrical outlet may cause the plug to overheat Replace any worn electrical receptacles promptly. 3.8 Use on 220-240VAC, 50Hz power supply. 3.9 Do not use the appliance on the same socket or electric circuit with other electrical appliances so as to prevent the circuit from being overloaded, which will cause fire. Please do not prolong the power cords by yourself or use movable socket. 3.10 Route the cord so that it will not be walked on, or pinched by furniture. 3.11 This product is intended for normal household indoor use only. -Q- OPERATION 1, Plug into any 220-240VAC, 50Hz source (see important safeguards section 3.3 regarding use of extension cords). 2. Your heater is equipped with a 5-position power switch: 3 1737.qxd 29.05.03 16:38 Page 8 e SYMBOL FUNCTION OFF OFF LO HI 1200 WATTS 2000 WATTS LO&OSC HI&OSC 1200 WATTS with oscillation 2000 WATTS with oscillation 3. Set the power switch to maximum (HI) for fast warm up of a room. Once the room is Comfortable, select a lower setting (LO) to reduce electrical consumption and to prevent (he room from becoming too warm. 4. Adjust the thermostat to maximum and select the desired power setting. Once the room is comfortable, rotate the thermostat counterclockwise, until the beater shuts off. The thermostat will now maintain the temperature by cycling (he heater on or off. During particularly cold weather, the low power setting may be insuf...
Other models in this manual:- ()