Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Air Conditioning ® GUI* & GCI* Installation Instructions Gas Fired Warm Air Affix this manual, Specification Sheet and Users Information Manual adjacent to the furnace. Furnace Table of Contents To The Owner .............................................................................. 2 To The Installer............................................................................ 2 I. Safety and Unit Location..................................................... 3 II. General Information ............................................................. 4 III. Air Requirements ................................................................. 4 IV. Category I Venting (Vertical Venting) ................................. 6 V. Masonry Chimneys .............................................................. 8 VI. Gas Piping .......................................................................... 12 VIl. Electrical Wiring ................................................................. 16 VIlI. Circulating Air and Filters ................................................ 18 IX. Sequence of Operation (Integrated Ignition Control) .... 21 X. Start-Up, Adjustments, and Checks ................................ 21 XI. Maintenance ....................................................................... 27 Amana Forced Air Central Furnace Design Complies With Requirements Embodied in The American National Standard / National Standard of Canada Shown Below. ANSI Z21.47•CAN/CGA-2.3 Central Furnaces RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION. ATTENTION INSTALLING PERSONNEL As a professional installer you have an obligation to Remember, it is your responsibility to install the product know the product better than the customer. This safely and to know it well enough to be able to instruct includes all safety precautions and related items. a customer in its safe use. Prior to actual installation, thoroughly familiarize Safety is a matter of common sense...a matter of yourself with this Instruction Manual. Pay special thinking before acting. Most dealers have a list of attention to all safety warnings. Often during installation specific good safety practices...follow them. or repair it is possible to place yourself in a position The precautions listed in this Installation Manual should which is more hazardous than when the unit is in not supersede existing practices but should be operation. considered as supplemental information. Amana October 1997(1) 10759818 Fayetteville, TN 37334 WARNING WARNING To The Owner If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – What to do if you smell gas: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. – Installation and service must be performed by a qualified installer, service agency or the gas supplier. WARNING Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the furnace before shutting off the electrical supply. It is important that you fill out the owner’s registration card and mail it today. This will assist Amana in contacting you should any service or warranty information change in the future. When filling in the registration card, be sure to include the Model, Manufacturing and Serial Numbers, plus the installation date. Your warranty certificate is also supplied with the unit. Read the warranty carefully and note what is covered. Keep the warranty certificate in a safe place, so you can find it, if necessary. If additional operating instructions are required, call the dealer where the purchase was made. To The Installer Before installing this unit, please read this manual to familiarize yourself on the specific items which must be adhered to, such as maximum external static pressure to unit, air temperature rise, minimum or maximum CFM, motor speed connections, and venting. These furnaces are designed for Category I venting only. WARNING To prevent possible death or personal injury due to asphyxiation, Amana Non- Condensing Gas Fired Warm Air Furnaces must be Category I vented. Do not vent any of these furnaces using Category III venting. Keep this literature in a safe place for future reference. 2 I. Safety and Unit Location WARNING To prevent personal injury or death due to improper installation, adjustment, alteration, service, or, maintenance refer to this manual or for additional assistance or information consult a qualified installer, service agency or the gas supplier. WARNING This product contains or produces a chemical or chemicals which may cause serious illness or death and w...