Votes - 1, Average rating: 3
(
)
)
|
manual abstract
Before each use, check the oil level. Never run the Engine with low or no engine oil. Running the Engine with low or no oil will permanently damage the unit. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. ® Copyright © 2006 by Harbor Freight Tools® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS Item Description Electrical Requirements 1,000 Watts Maximum Output 120 VAC, 3-Prong, Outlet (Qty. 2) With 8 AMP, Push Button, Circuit Breaker Protection 12 VDC Outlet (Qty. 1) With 12 AMP, Push Button, Circuit Breaker Protection Generator Type: Brushless, Revolving Field, Self-Exciting, 2-Pole, Single Phase Engine 2.4 HP / Air Cooled OHV Mitsubishi Engine GT240 – EPA approved. 4-Stroke / Recoil Start / 3,600 RPM Unleaded Gasoline Powered / MTI Fuel Tank Capacity: 1.2 Gallon (Approx.) – use unleaded gasoline Engine Oil Capacity: 1/2 Quart (Approx.) / Recommended Oil: 10W – 30W Approximate Run Time: 5 Continuous Hours @ Full Tank Additional Features: Automatic Low Oil Shutdown Operating Noise Level 63 Db Accessories Spark Plug Wrench (Qty. 1) / Screwdriver (Qty. 1) Overall Dimensions 17-3/8” L x 13” W x 14-1/2” H Net Weight 67 Pounds NOTE: Not CARB - approved for use in California. SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES AND PRECAUTIONS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 2 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Provide barriers or shields as needed. PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure the Power Switch (14) is in its “OFF” position before moving the Generator and before performing any service, maintenance, or cleaning procedures on the unit. 4. Remove adjusting keys or wrenches before turning the Generator on. A wrench or a key that is left attached to a rotating part of the machine may result in personal injury. 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 6. Use safety equipment. Always wear eye protection. Always wear ANSI-approved safety impact goggles when using this product. ANSI- approved hearing protection must also be used. TOOL USE AND CARE 1. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 2. Do not use the Generator if the Engine’s Power Switch (14) does not turn it on or off. Any tool that cannot be controlled with its power switch is dangerous and must be replaced. 3. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 4. Maintain tools with care. Properly maintained tools are less likely to malfunction and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. SKU 93881 For technical questions, please call 1-800-444-3353 PAGE 3 5. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 6. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 1. Too...