Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 1.02 mb File name: Language of manual:

. Only use the powerplug supplied. . The powerplug transforms 100-240 volts to a safe low voltage of less than 24 volts. . The powerplug contains a transformer. Do not cut off the powerplug to replace it with another plug, as this will cause a hazardous situation. . Do not use a damaged powerplug. . If the powerplug is damaged, always have it replaced by one of the original type in order to avoid a hazard. C . Make sure the powerplug does not get wet. . Charge, store and use the appliance at a temperature between 5cC and 35cC. . Always unplug the shaver before cleaning it under the tap. . Do not recharge the shaver in a closed pouch. C . The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Charging Make sure the appliance is switched off before you star t charging it. ENGLISH When you charge the shaver for the first time or after a long period of disuse, let it charge continuously for 4 hours. Charging normally takes approx. 1 hour. Do not leave the appliance connected to the mains for more than 24 hours. Charge indications Charging C . As soon as you connect the shaver to the mains, the plug symbol starts burning green. When 20% of the batteries has been charged, the green 20% indication goes on. As charging continues, more and more green charge percentage indications go on to indicate to what level the batteries have been charged. Batteries fully charged C . When the batteries have been fully charged, all green charge percentage indications are burning and the 'FULL' indication as well the plug symbol start blinking green. ENGLISH Remaining capacity C . As the energy level of the batteries decreases, the number of green charge percentage indications that are burning decreases too. Batteries running low C . When the batteries are running low, the plug symbol turns red.When you switch the shaver off, the plug symbol blinks red for 4 seconds. Charging the appliance Charge the appliance when the plug symbol blinks red. Do not recharge the shaver in a closed pouch. C 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. 3 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the batteries have been fully charged. Cordless shaving time A fully charged shaver has a cordless shaving time of up to 70 minutes. S N S N ENGLISH Using the appliance Personal Comfort Control C . The Personal Comfort Control system allows you to adapt the shaver to your skin type. -You can set the shaver to 'Normal' for a fast and comfor table close shave. -You can set the shaver to 'Sensitive' for a comfor table close shave with optimal skin comfor t. C . The … position is the neutral position. C . The 'S' position is best suited for sensitive skin. C . The 'N' position is best suited for normal skin. Shaving 1 Switch the shaver on by p...

Download now

Please, enter two numbers from picture: