Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 678.74 kb File name: Language of manual:

7) Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 4 5 Switch off the shaver by pushing the on/off slide downwards. Put the protection cap on the shaver every time you have used it, to prevent damage (Fig. 8). Cleaning Regular cleaning guarantees better shaving performance. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water ever y time you have used the appliance. Never rinse the shaver when the battery compartment is open. Always make sure the cap of the battery compartment is in place and properly locked before you start rinsing the shaver. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Every day: shaving unit and hair chamber 1 2 3 4 5 6 Switch off the shaver. Remove the shaving unit. (Fig. 9) Rinse the outside of the shaving unit under a hot tap for some time (Fig. 10). Rinse the inside of the shaving unit under a hot tap for some time. (Fig. 11) Rinse the hair chamber under a hot tap for some time. (Fig. 12) Put the shaving unit back onto the shaver and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. Every six months: shaving heads 1 2 3 4 5 6 Switch off the shaver. Remove the shaving unit (Fig. 9). Turn the wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 13). Remove the shaving heads from the shaving unit. (Fig. 14) Remove the guard from the cutter (Fig. 15). Clean the cutters with the short-bristled side of the brush. (Fig. 16) Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 7 8 9 Brush the guard. (Fig. 17) Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, press the wheel and turn it clockwise. Put the shaving unit back onto the shaver. storage Put the protection cap on the shaver to prevent , damage (Fig. 8). Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ64 Philips Double Action Super Lift & Cut Shaving Heads (HQ5715) or HQ54 Philips Double Action Lift & Cut Shaving Heads (HQ5710,5705). 1 2 3 4 5 6 Switch off the shaver. Remove the shaving unit (Fig. 9). Turn the wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 13). Remove the shaving heads from the shaving unit and replace them with new ones (Fig. 14). Put the retaining frame back into the shaving unit, press the wheel and turn it clockwise. Put the shaving unit back onto the shaver. Accessories The following accessories are available: -HQ64 Philips Double Action Super Lift & Cut Shaving Heads (HQ5715) -HQ54 Philips Double Action Lift & Cut Shaving Heads (HQ5710/HQ5705) -HQ110 Philips S...

Download now

Please, enter two numbers from picture: