Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 681.14 kb File name: Language of manual:

-Charge, use and store the shaver at a temperature between 5°C and 35°C. -Always unplug the shaver before you clean it under the tap. EnglisH -Be careful with hot water. Always check if the water is not too hot, to avoid burning your hands. -The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. -This washable shaver is not suitable for shaving in the shower. -Do not immerse the shaver in water. -Water may leak from the socket at the bottom of the appliance when you rinse it.This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. general -The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Charging Make sure the appliance is switched off before you star t to charge it. When you charge the shaver for the first time or after a long period of disuse, let it charge continuously for at least 12 hours, for instance overnight. EnglisH Charging normally takes 1 hour. You can also shave without charging by connecting the shaver to the mains. Charge indications Charging -When you star t charging the empty shaver, the charging light goes on. Battery fully charged -When the batter y is fully charged, the charging light star ts flashing. When you unplug the shaver, the charging light goes out. Battery running low -When the batter y is running low, the batter y-low light goes on. When you switch off the shaver, this light flashes a few times. Cordless shaving time After having been charged for 6 minutes, the batter y contains enough energy for one shave. When the shaver is fully charged, it has a cordless shaving time of up to 35 minutes. Charging the appliance Charge the shaver when the batter y-low light goes on. 1 2 3 Put the appliance plug in the shaver. Put the adapter in the wall socket. Remove the adapter from the wall socket and pull the appliance plug out of the shaver when the battery is fully charged. EnglisH Using the appliance Shaving 1 Press the on/off button once to switch on the shaver. The power-on lights go on. ,2 Move the shaving heads quickly over your skin. Make both straight and circular movements. Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 4 Clean the shaver (see chapter ‘Cleaning and maintenance’). Put the protection cap on the shaver every time you have used it, to prevent damage to the shaving heads. Trimming You can use the trimmer to groom your sideburns and moustache. 1 Push the slide downwards to open the trimmer. The trimmer can be activated while the motor is running. 2 Close the trimmer after trimming (‘click’). EnglisH Cleaning and maintenance Regular cleaning guarantees better shaving performance. Be careful with hot water. Always check if the water is not too hot, to avoid burning your hands. Note:Water may leak from the socket at the bottom of the appliance when you rinse it.This is normal and not dangerous. Every day: shaving unit and hair chamber 1 2 3 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Press the release button to open the shaving unit. Rinse the hair chamber and the inside of the shaving unit under a hot tap for some time. 4 5 Rinse the outside of the shaving unit. Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. EnglisH 6 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Press the release button to open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 4 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. Close the shaving unit. Trimmer Clean the trimmer ever y time you have used it. 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 10 EnglisH 2 Clean the trimmer with the brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. storage -Put the protection cap on the shaver to prevent damage to the shaving heads. replacement Replace the shaving heads ever y two years for optimal shaving resu...

Download now

Please, enter two numbers from picture: