Votes - 0, Average rating: 0
(
)
)
|
manual abstract
The green charging light goes on to indicate that , the shaver is charging. When the shaver is fully charged, the green , charging light starts flashing. 3 Remove the mains plug from the wall socket and pull the appliance plug out of the shaver when the shaver is fully charged. EnglisH Do not leave the appliance connected to the mains for more than 24 hours. Cordless shaving time A fully charged shaver has a cordless shaving time of up to 30 minutes. using the appliance shaving Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. Shaving on a dr y face gives the best results. 1 Press the switch lock (1) and push the on/off slide upwards (2) to switch on the appliance. Note:The switch lock prevents accidental switching on of the appliance. 2 Move the shaving heads over your skin. Make both straight and circular movements. 3 Push the on/off slide downwards to switch off the shaver. 4 Put the protection cap on the shaver after use to prevent damage to the shaving heads. Trimming You can use the trimmer to groom your sideburns and moustache. EnglisH 1 Push the slide upwards to open the trimmer. The trimmer can be activated while the motor is running. 2 After use, push the trimmer downwards to close it. Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Regular cleaning guarantees better shaving performance. For easy and optimal cleaning, Philips Shaving Head Cleaning Spray (type no. HQ110) is available. Ask your Philips dealer for information. Note: Philips Shaving Head Cleaning Spray may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 2 Clean the top of the appliance first. Use the cleaning brush supplied. EnglisH 3 Press the release button (1) and remove the shaving unit (2). 4 Clean the inside of the shaving unit and the hair chamber with the cleaning brush. 5 Put the shaving unit back onto the shaver. Every two months: shaving heads 1 2 3 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and remove the shaving unit (2). To remove the retaining frame, push the sides of the central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2). EnglisH 4 Slide the shaving heads out of the retaining frame and clean them one by one. Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix up the sets, it could take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrow. 7 Clean the guard with the cleaning brush. Slide the shaving heads back into the retaining frame and put the retaining frame back into the shaving unit. Put the shaving unit back onto the shaver. Extra thorough cleaning For extra thorough cleaning, put the shaving heads in a degreasing liquid (e.g. alcohol) ever y six months. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Trimmer Clean the trimmer ever y time you have used it. 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 10 EnglisH 2 Clean the trimmer with the cleaning brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. storage 1 Switch off the shaver. 2 Put the protection cap on the shaver after use to prevent damage to the shaving heads. 3 Store the appliance in the luxury pouch. Replacement Replace the shaving heads ever y two years for optimal shaving results. Replace damaged or worn shaving heads with HQ4 C Philips shaving heads only. 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. EnglisH 11 2 Press the release button (1) and remove the shaving unit (2). 3 To remove the retaining frame, push the sides of the central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2). 4 Slide the shaving heads out of the retaining frame and replace them with new ones. 5 Put the retaining frame back into the shaving unit. Put the shaving unit back onto the shaver. accessories The following accessories are available: HQ4 C Philips shaving heads. HQ110 Philips Shaving Head Cleaning Spray (not available in China). Environment Do not throw away the appliance with the normal househol...