Votes - 4, Average rating: 4.3 ( )

Manafacture: Philips File size: 332.07 kb File name: Language of manual:

2). 4. Easy does It. Gently press the razor to your skin so the floating heads can follow the contours of your face. 5. Turn razor OFF (and unplug if shaving with cord). IMPORTANT: Clean razor head regularly following MAINTENANCE instructions. 5. POP-OUT TRIMMER 1. Switch razor ON. 2. Push Trimmer Slide Switch up to pop out Trimmer. 3. Hold Trimmer, as shown (Fig. 3), to exact hairline desired. Move Trimmer downward with gentle pressure. 4. Close Trimmer by pushing Trimmer Slide Switch down. 5. Turn razorOFF(and unplug if shaving with cord). 6. TO CLEAN TRIMMER 1. Switch razor OFF (and unplug if shaving with cord). 2. Push Trimmer Slide Switch up to pop out Trimmer. 3. Brush out Trimmer section using long bristles of brush (Fig. 4). 4. Lubricate Trimmer teeth twice a year with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (Fig. 5). 5. Close Trimmer by pushing Trimmer Slide Switch shown. 7. MAINTENANCE/ CLEANING INSTRUCTIONS IMPORTANT ■ Always switch razor OFF and remove plug from outlet before cleaning. ■ Always store razor with Protective Plastic Head Guard on Razor Head Assembly. ■ Never clean, remove or replace head assembly while motor is on. ■ Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs. ■ Do not use razor if combs are damaged or broken. 7. CLEANING INSTRUCTIONS (CONT.) 7A. ONCE A WEEK 1. Clean Razor Head Assembly as shown (Fig. 6). 2. Press Razor Head Release Button and lift Razor Head Assembly using thumb and index finger to remove from razor housing (Fig. 7). 3. Clean inside of Razor Head Assembly and Hair Chamber with long bristles of brush. 4. Press Razor Head Assembly back on razor housing. 7B.ONCE EVERY 4-8 WEEKS IMPORTANT: Do NOT interchange the cutters and combs. They are a matched set and if interchanged may adversely affect shaving performance until cutters reseat themselves. Therefore, remove, clean, and replace each set individually 1. Remove Razor Head Assembly (Fig. 7). 2. While holding Razor Head Assembly in one hand, press center wheel down while turning counterclockwise to re- lease frame and lift out. Set frame aside (Fig. 8). 3. Remove one cutter/ comb, at a time, out of frame as shown (Fig. 9). 4. Cutter should be held as shown and brushed in an upward motion (Fig. 10). Clean inside of comb with Iona bristles of brush in a circular motion. 5. For consistently close and comfortable shaves, razor heads should be cleaned and lubricated every 4-8 weeks. Clean heads in a degreasing liquid (e.g. Norelco Razor Cleaner, RAZORMATE Electrosonlc Cleaner or alcohol). 6. While holding Razor Head Assembly in one hand, gently place one cutter/comb back into Assembly (Fig. 11). 7. Repeat procedure for other two cutting heads. 8. Replace frame, with cutting heads in place, back into Razor Head Assembly. While pressing down, turn wheel clockwise to lock frame Into place (Fig. 12). 9 Press Razor Head Assembly back on razor housing. 10. Spread Norelco Razor Lubricant, model AL80, or one drop of mineral oil over floating heads with your finger. 8. HQ4 REPLACEMENT HEADS AND RAZOR ACCESSORIES Replacement Heads: The self-sharpening rotary blades In your Norelco razor are precision-made to give closer shaves. When they finally do need replacing, specify only Norelco brand replacement cutters and combs, model HQ4. DO NOT USE shaver sharpeners as this will damage your blades and lifters and will adversely affect the shaving performance. NOTE: It is recommended that you replace your razor heads once a year. Razor Cleaners: Norelco RAZORMATE Electro-sonic Heads Cleaner, model ERC100. Norelco Razor Cleaner, model RC1776. Norelco Razor Lubricant, model AL80. Norelco Razor Accessories may be purchased at a store near you, at an Authorized Norelco Service Location, or by using the handy order form enclosed. 9. IMPORTANT BATTERY DISPOSAL INFORMATION When discarding your razor: THIS NORELCO RAZOR CONTAINS NICKEL-CAD-MIUM RECHARGEABLE BATTERIES WHICH MUST BE RECYCLED OR DISPOSED OF PROPERLY. Refer to enclosed instruction sheet for directions on removing rechargeable batteries. CAUTION: Batteries should be removed by consumer only when razor is to be discarded. ■ Make sure razor Is unplugged before dismantling for battery removal. ■ All servicing or battery replacement should be performed by an Authorized Norelco Service Location only. CjNoreico 60-Day Money-Back Guarantee To enjoy the closest and most comfortable shave from your new Norelco Men’s Razor, the razor should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Norelco Men’s Razor, send the product back and we’ll refund you the full purchase price. The razor must be shipped prepaid by insured mail, insurance prepaid, and have the sales slip, indicating purchas...

Download now

Please, enter two numbers from picture: