Votes - 1, Average rating: 5
(
)
)
|
manual abstract
Recharging the Shaver Your shaver features a green indicator light that flashes when recharging is needed, remains on while the shaver is charging, and turns off when the shaver is fully charged. Use only the power/recharger cord that came with the shaver. In addition, your shaver is designed to be used while plugged into an electric outlet. The unit will not charge while it is in use, so be sure to turn the unit off to allow charging when you are finished shaving. Your shaver will provide a 3 minutes shave after 5 minutes of charging. When using your shaver for the first time or has not been used for a long time, charge the shaver for 16 hours. 1. Insure that the On/Off switch is in the “Off” position. Axis Pivot |1 | English 2. First, connect the power cord to the shaver and then plug it into an electric outlet. The charging indicator light will glow green to indicate that the unit is charging normally. Recharging generally takes one hour. When fully charged, your shaver will provide approximately one week of shaving run time. Storing the Shaver and Power cord If the shaver is to remain unused for a long period of time, store the unit and power cord in a cool, dry place. Do not wrap the cord around the unit during storage. Avoid twisting the power cord. Be sure to unplug and untwist the cord if it becomes twisted during use or while charging. Removing the Batteries for Disposal/ Recycling It is important that the rechargeable batteries in your shaver be recycled or properly disposed of after it has reached the end of its Axis Pivot |20| English Axis Pivot |21| English useful life. Turn the On/Off Switch ON and run the shaver until the inner cutters stop. 1. Remove the headguard, hair- pocket, and inner cutters. 2. Remove the trimmer retainer. 3. Remove the 3 screw covers on the back of shaver. Remove 2 side panels. 4. Remove 3 screws on the back of shaver. 5. Gently pull the two halves of the shaver body apart. Be careful that screw trimmer retainer screw cover side panel the component may jump out. 6. Pull the batteries out from the shaver. 7. Cut the wires that connect the batteries (2 wires for a battery) with nippers. WARNING! To avoid the risk of bursting and the subsequent release of toxic materials, never mutilate or place the batteries in fire. To prevent accidental burns, avoid short-circuiting the batteries. Dispose of batteries in accordance with local disposal /recycling requirements. IMPORTANT! For best shaving performance and results, we recommend that you replace your shaver’s foil screens every six months and inner cutters at least once a year. To Replace Foil Screens Skin irritation or a deterioration of shave quality typically indicates that your foils need to be replaced. Replacement intervals will vary with Axis Pivot |22| English assembly over the cutters. Be careful not to damage the foils. Gently slide the head assembly down until it seats firmly into place. (fig. 8) 7 8 individual use and hair types. 1. Depress the hairpocket release buttons on both sides of the shaver and gently lift it off. (fig. 7) 2. Position the replacement head To Replace the Inner Cutters NOTE: Always replace foil screens when replacing the inner cutters. 1. Remove the foil screen assembly by pressing the release buttons on both sides of the shaver and lifting the assembly off. (fig. 7) 2. Remove the inner cutters by grasping and lifting upwards.(fig. 9) Axis Pivot |23| English 3. Be sure to hold the replacement cutters firmly as you carefully insert them into the inner cutter mounts. 4. Push the replacement cutters down firmly until they lock into place. 5. Replace the foil screen assembly and gently slide it down until you hear it lock into place. (fig. 8) Ordering replacement parts Please contact Axis / BPI at 1-877-263-9500 to order replacement parts for your Axis shaver. Please refer to the following part number. AP-2 Replacement Outer Foil Frame and Inner Cutters for Model AX-1330 > The above parts are available at the retailer from whom your shaver was purchased. Axis Pivot |2 | English If your shaver requires service: Call Axis at 1-877-263-9500. To assist us in serving you, please have the model number and date of purchase for your shaver available. 1-YEAR LIMITED WARRANTY AXIS/Bodyline Products International, Inc. (BPI) warrants that your product, except as noted below, is on the date of purchase free from defect in material and workmanship for a period of one year. In the event of a defect in material or workmanship, AXIS / BPI will repair or replace this product with new parts, free of charge as follows: 1. The warranty is extended only to the original purchaser. A purchase receipt or other proof of date of the original purchase is required for service and parts replacement under this warranty. 2. Do not return the product to the retailer from whom this product was purchased. Axis Pivot |2 | English 3. Contact AXIS/BPI toll-free at 1-877-263-9500 to obtain authorization during the warranty period...