Votes - 2, Average rating: 5
(
)
)
|
manual abstract
(fig. 2) 4. Remove the back cover to expose the batteries. (fig. 3) 5. Remove the rechargeabscard your shaver. DO NOT attempt to ps and the batterlnaions between the termes usie batterling a wire cutter to cut the niug les. Do not attempt to scard your shaver connectiireplace the batteries. Diyour shaver after the batteries have been removed. Diin accordance with your local disposal/recycling requirements. (fig. 4) ies in accordance with local disposal/recycling requirements. To remove floating heads and inner cutter assembly IMPORTANT: For optimum shaving performance and results, we recommend that you replace your shaver’s floating heads and inner cutters once a year. To replace floating heads and inner cutters, please refer to the “Ordering Replacement Parts” section. Skin irritation or a deterioration of shaving performance typically indicates that your cutting heads need to be replaced. Replacement intervals will vary with individual use and different beard types. 1 2 3 4 Axis Orbit 4000 and Orbit 2000 |22| english Axis Orbit 4000 and Orbit 2000 |23| english Axis Orbit 4000 and Orbit 2000 |24| english Axis Orbit 4000 and Orbit 2000 |25| english 1. Grasp the floating head assembly and gently lift it off from the shaver. (fig.1, part 1) 2. Detach the inner cutter assembly (fig. 2, part 2) by pushing down and turning counter clockwise the screw knob in the center (fig. 2, part 3), then pull upwards away from the outer cutter assembly. 3. Then, remove outer cutter assembly. (fig. 3, part 4) To replace floating heads and inner cutter assembly 1. First, insert the new outer cutter assembly into the frame, then insert the new inner cutter assembly back into the housing and lock in place by pushing down and turning clockwise the screw knob located in the center. Please make sure that the frame pins (see fig. 3, part 5) are lined up with the locating holes as seen in fig. 2, part 6. 2. Please make sure that the floating head and inner cutter assembly is secure before attaching floating head and inner cutter assembly to shaver. 3. When locking assembly back into place, a small click will be heard. 4. Always keep protective head guard attached when shaver is not in use. This will assure that the floating heads will not be damaged. Ordering replacement parts Please contact Axis/BPI at 1-877-263-9500 to order replacement parts for your Axis shaver. Please refer to the following part number. Part number: AO-1 Description: Replacement Rotary Heads and Rotary Blades Assembly for Model 2 1 4 5 3 6 inner cut assembly screw knob locating holes outer cut assembly frame pins AX-2320/AX-2330 >The above parts are available at the retailer from whom your shaver was purchased. If your shaver requires service: Call Axis at 1-877-263-9500. To assist us in serving you, please have the model number and date of purchase for your shaver available. 1-YEAR LIMITED WARRANTY AXIS/Bodyline Products International, Inc. (BPI) warrants that your product, except as noted below, is on the date of purchase free from defect in material and workmanship for a period of one year. In the event of a defect in material or workmanship, AXIS/BPI will repair or replace this product with new parts, free of charge as follows: 1. The warranty is extended only to the original purchaser. A purchase Axis Orbit 4000 and Orbit 2000 |2 | english receipt or other proof of date of the original purchase is required for service and parts replacement under this warranty. 2. Do not return the product to the retailer from whom this product was purchased. 3. Contact AXIS/BPI toll-free at 1-877-263-9500 to obtain authorization during the warranty period to return the defective product by mail, postage prepaid. LIMITATIONS AND EXCLUSIONS There are no express warranties except as listed above. This warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover foils, blades, cutters, or attachments or damage that occurs in shipment, or failures that are caused by products not supplied by AXIS / Bodyline Products International, Inc., or failures that result from accident, misuse, abuse, and neglect from mishan- Axis Orbit 4000 and Orbit 2000 |2 | english dling, misapplication, improper maintenance, improper cleaning, alteration, modification, line power surge, or commercial use of the product, such as hotel, office or rental use of the product, or service by anyone other than AXIS / Bodyline Products International, Inc., or damage that is attributable to acts of God. AXIS / BODYLINE PRODUCTS INTERNATIONAL, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANDISE AND FITNESSS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages...
Other models in this manual:Shavers - AXIS ORBIT AX-2330 (1.88 mb)