Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
If you are still not convinced after 21 days,Norelco will refund you the full purchase price, guaranteed. HOW TO SHAVE WITH AN ELECTRIC RAZOR Shaving with dry skin gives the best results. 1 Turn razor ON by locking the switch to the “ON” position. S h ave against the direction of beard growth using both straight and circular move m e n t s . 2 Stretch your skin with your free hand so blades can lift and cut whiskers.Gently press razor to skin,so the floating heads can follow the contours of your face. DO NOT press too hard. Too much pressure can pinch the skin into combs. 3 Turn razor OFF by locking the switch to the “OFF” position. 4 Put the protective razor head cap on the razor to protect razor heads. Replace your Norelco Micro Action razor heads (model # HQ4) once a year for optimal shaving results. 5 6. TRIMMING To groom sideburns and moustache: 1 Turn razor ON by locking the switch to the “ON” position. 2 Push up Trimmer Slide Switch. 3 Hold Trimmer as shown and move in downward strokes with gentle pressure. 4 Close Trimmer by sliding Trimmer switch down. 5 Turn razor OFF by locking switch to the “OFF” position. CLEANING Once A Week:Razor 1 Turn razor OFF by locking switch to “OFF” position. 2 Clean the top of the razor with the supplied brush. 3 Remove Razor Head Assembly from the razor unit. 6. TRIMMING To groom sideburns and moustache: 1 Turn razor ON by locking the switch to the “ON” position. 2 Push up Trimmer Slide Switch. 3 Hold Trimmer as shown and move in downward strokes with gentle pressure. 4 Close Trimmer by sliding Trimmer switch down. 5 Turn razor OFF by locking switch to the “OFF” position. CLEANING Once A Week:Razor 1 Turn razor OFF by locking switch to “OFF” position. 2 Clean the top of the razor with the supplied brush. 3 Remove Razor Head Assembly from the razor unit. 7. 4 Brush the inside of housing and Razor Head Assembly. 5 Replace the Razor Head Assembly back on razor. Every Two Months:Razor Heads 1 Turn razor OFF by locking switch to “OFF” position and disconnect from outlet. 2 Remove Razor Head Assembly from housing unit. 3 Brush the inside of the housing. 4 Turn Razor Head Assembly over so that the underside is exposed. 5 Press down and turn wheel of frame counterclockwise. 6 Remove the frame and brush clean. 8. 7 Remove and clean one cutter and head at a time. • Be careful not to mix up cutters and heads. They are a matched set and if interchanged,it will greatly affect shaving performance. 8 Separate the cutter from the comb. 9 Only brush the cutter in an upward motion. Use the short bristled side of the brush. 10 Brush the slots of the razor head. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g.Norelco Razor Cleaner, model RC1776,or alcohol) and lubricated with Norelco Razor Lubricant,model AL80,or one drop of mineral oil (in the center of the head). 11 Replace the cutter and razor head in the Head Assembly. 12 Repeat the process for the other two razor heads (cutters and combs). 13 Replace the frame. 14 Press down and turn the wheel clockwise until it locks into place. 15 Replace the Razor Head Assembly back on razor. After Each Use:Trimmer 1 Turn razor OFF by locking the switch to the “OFF” position. 2 Push Trimmer Slide Switch up to pop-up Trimmer. 3 Clean Trimmer with the brush every time you use it. 4 Lubricate the Trimmer teeth with Norelco Razor Lubricant (model AL80),or with one drop of mineral oil every 6 months. 5 Close Trimmer by sliding Trimmer switch down. 9. 10. For assistance or the Authorized Norelco Service Location nearest you,call toll free: ASSISTANCE 1-800-243-3050 or visit our website:Authorized Norelco Service Location information is available 24 hours a day, 7 days a week. ACCESSORIES Replacement Heads • Model HQ4 - For maximum razor performance,replace your Norelco Micro Action razor heads once a year. Razor Lubricant & Cleaners • RC1776 - Norelco Razor Cleaner • AL80 - Norelco Razor Lubricant Norelco Razor Accessories may be purchased at a store near you,an Authorized Norelco Service Location, by the order form enclosed or visit our we b s i t e : w w w. n o re l c o. c o m BATTERY REMOVAL This Norelco razor contains a rechargeable Nickel- Cadmium battery,which must be disposed of properly. Batteries should only be removed when razor is to be discarded. Refer to enclosed instruction sheet for directions on removing the rechargeable batteries. FULL TWOYEAR WARRANTY Philips Electronics North America Corporation warrants each new Norelco Pro d u c t , M o d e l 4607/4605/4604/4603/4602/4601X (except cutters and combs) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the...