Votes - 0, Average rating: 0
(
)
)
|
manual abstract
English
2 Clean the top of the appliance first, using the brush
throw away the batteries with the normal household
supplied (Fig. 9).
waste, but hand them in at an official collection point.
-
Do not throw away the appliance with the normal
important
3 Press the release button (1) and remove the
household waste at the end of its life, but hand it in
Read this user manual carefully before you use the
shaving unit (2) (Fig. 10).
at an official collection point for recycling. By doing
appliance and save it for future reference.
4 Clean the inside of the shaving unit and the hair
this, you help to preserve the environment (Fig. 19).
-
Keep the appliance dry (Fig. 1).
chamber with the brush (Fig. 11).
-
This appliance is not intended for use by persons
Guarantee & service
(including children) with reduced physical, sensory or 5 Put the shaving unit back onto the shaver.
If you need information or if you have a problem, please
mental capabilities, or lack of experience and
Every two months: shaving heads
visit the Philips website at www.philips.com or contact
knowledge, unless they have been given supervision
the Philips Customer Care Centre in your country
or instruction concerning use of the appliance by a
1 Switch off the shaver.
(you find its phone number in the worldwide guarantee
person responsible for their safety.
leaflet). If there is no Customer Care Centre in your
-
Children should be supervised to ensure that they
2 Press the release button (1) and remove the
country, go to your local Philips dealer or contact the
do not play with the appliance.
shaving unit (2) (Fig. 10).
Service Department of Philips Domestic Appliances and
-
Use and store the appliance at a temperature
3 Remove the retaining frame by pushing the sides of Personal Care BV.
between 5°C and 35°C.
the central spring towards each other (1) and lifting The shaving heads (cutters and guards) are not covered
Electromagnetic fields (EMF)
the retaining frame out of the shaving unit
by the terms of the international guarantee because they
This Philips appliance complies with all standards
(2) (Fig. 12).
are subject to wear.
regarding electromagnetic fields (EMF). If handled
4 Slide the shaving heads out of the retaining frame
Troubleshooting
properly and according to the instructions in this user
and clean them one by one (Fig. 13).
manual, the appliance is safe to use based on scientific
1 Reduced shaving performance
evidence available today.
Do not mix up the cutters and the guards.
, Cause 1: the shaving heads are dirty.The shaver has
This is essential since each cutter has been ground with
not been cleaned well enough or has not been
Inserting batteries
its corresponding guard for optimal performance. If you
cleaned for a long time.
The appliance runs on two R6 AA 1.5-volt batteries.
accidentally mix the sets up, it could take several weeks
-
Clean the shaver thoroughly before you continue
Preferably use Philips alkaline batteries.
before optimal shaving performance is restored.
shaving. See chapter ‘Cleaning and maintenance’.
, Cause 2: long hairs are obstructing the shaving
Make sure that your hands are dry when inserting the
5 Clean the cutter with the short-bristled side of the
heads
batteries.
brush (Fig. 14).
-
Clean the cutters and guards with the brush supplied.
1 Remove the lid of the battery compartment (Fig. 2)
Brush carefully in the direction of the arrow.
See chapter ‘Cleaning and maintenance’, section
‘Every two months: shaving heads’.
2 Place two batteries in the battery
6 Brush the guard (Fig. 15).
, Cause 3: the shaving heads are damaged or worn.
compartment (Fig. 3).
7 Slide the shaving heads back into the retaining
-
Replace the shaving heads. See chapter ‘Replacement’.
Make sure the + and - indications on the batteries match
frame and put the retaining frame back into the
the indications in the battery compartment.
shaving unit (Fig. 16).
2 The shaver does not work when the on/off slide is
The shaver does not work if the batteries have been
pushed upwards.
placed incorrectly.
8 Put the shaving unit back onto the shaver.
, Cause: the batteries are empty
, For extra thorough cleaning, clean the shaving
-
Replace the batteries. See chapter ‘Inserting batteries’.
3 Put the lid of the battery compartment back onto
heads by putting them in a degreasing liquid (e.g.
the appliance. First insert the top part of the lid (1)
alcohol) every six months. To remove the shaving
and then press the bottom part down until you
heads, follow steps 1 to 4 described above. After
hear a click (2) (Fig. 4).
cleaning, lubricate the central point on the inside of
, To avoid damage due to battery leakage:
the guards with a drop of sewing machine oil to
-
do not expose the appliance to temperatures higher
prevent wear of the shaving heads (Fig. 17).
than 35 cC;
storage
-
remove the batteries if the appliance is not going to
be used for a month or more;
, Put the protection cap on the shaver to prevent
-
do not leave empty batteries in the appliance.
damage (Fig. 7).
Cordless shaving time
Replacement
Two new batteries offer a cordless shaving time of 60
Replace the shaving heads every two years for optimal
minutes.
shaving results.
Replace damaged or worn shaving heads with HQ4 Ç
Using the appliance
Philips shaving heads only.
Shaving
1 Switch off the shaver.
1 Switch on the shaver by pressing the switch lock
2 Press the release button (1) and remove the
and pushing the on/off slide upwards (Fig. 5).
shaving unit (2) (Fig. 10).
The switch lock prevents accidental switching on of the
appliance.
3 Remove the retaining frame by pushing the sides of
the central spring towards each other (1) and lifting
2 Move the shaving heads quickly over your skin,
the retaining frame out of the shaving unit
making both straight and circular
(2) (Fig. 12).
movements (Fig. 6).
Shaving on a dry face gives the best results.
4 Slide the shaving heads out of the retaining
Your skin may need 2 or 3 weeks to get accustomed to
frame (Fig. 13).
the Philips shaving system.
5 Slide new shaving heads into the retaining
3 Switch off the shaver by pushing the on/off slide
frame (Fig. 16).
downwards.
6 Put the retaining frame back into the shaving
4 Put the protection cap on the shaver every time
unit (Fig. 18).
you have used it, to prevent damage (Fig. 7).
7 Put the shaving unit back onto the shaver.
Cleaning and maintenance
Accessories
Regular cleaning guarantees better shaving performance.
The following accessories are available:
, For easy and optimal cleaning, the Philips Action
Clean (shaving head cleaner, type HQ100) is
-
HQ4 Ç Philips shaving heads.
available. Ask your Philips dealer for
-
HQ100 Philips Shaving Head Cleaner (not available
information (Fig. 8).
in China).
-
HQ101 Philips Shaving Head Cleaning fluid (not
Note: The Philips Action Clean may not be available in all
available in China).
countries. Contact the Customer Care Centre in your country -
HQ110 Philips Shaving Head Cleaning Spray (not
about the availability of this accessory.
available in China).
You can also clean the shaver in the following way:
Environment
Every week: shaving unit and hair chamber
-
Batteries contain substances that may pollute the
environment. Remove the batteries when they are
1 Switch off the shaver.
empty or when you discard the appliance. Do not
4222.002.4423.5
2/5
...