Login:
Votes - 1, Average rating: 4 ( )

User manual Cres Cor, model CO-151-HW-UA-6B

Manafacture: Cres Cor
File size: 168.2 kb
File name: 92dd9904-2f63-4f1e-a474-304646e9c742.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Slow convected air system promotes natural browning for flavor and seals in natural juices. • Moist heat, dry heat or a combination of both allows for a • variety of food preparation and holding. • Full 4950 Watts of power allows for reheating of prepared • meals or bulk items. Maximum temperature 350°F. (176.5°C.). • 1850 Watt water heater with separate control and low • water indicator. • Energy Management Logic system electronically directs power to where it’s needed most during different operating cycles. • Pre-setting automatic controls for roasting and holding • cycles allows for unattended operation 24 hours a day. • Roast and hold over 120 lbs. (54 kg.) of meat in just • 7 sq. ft. of floor space. • Non-venting oven, permitted by most local codes, provides • easy, inexpensive installation. • 304 stainless steel construction throughout for ease • of cleaning. • Smooth interior coved corners prevent food particle/grease buildup. CO-151-HW-UA-6B SANITATION • Field reversible insulated door prevents temperature loss. Silicone door gasket for proper seal. High temperature ceramic magnetic latch for “easy open” and security during transport. Latch and hinges mounted inboard. • Standard with right hand hinging; left hand hinging • available upon request. • Push/pull handle mounted on rear allows easy maneuvering. ACCESSORIES and OPTIONS • Non-corrosive stainless steel wire universal angles accommodate a large variety of pan sizes on adjustable (Available at extra cost): 1-1/2" spacing. Supplied with 6 sets of angles and three o Security Panel for Controls raised wire grids. o Tempered Glass Door Window • Heavy duty 5" swivel casters, two with brakes. Provides o Key Lock Latch • mobility when fully loaded. o Extra Wire Grids • Probe Power Unit Available at Extra Cost (see page E-6) o Extra Universal Angles o Side and Rear Bumper POWER UNIT OPTIONS: o Corner Bumpers • 4950 Watts, 208 Volts, 1 Phase, 60 Hz. • 4950 Watts, 240 Volts, 1 Phase, 60 Hz. o 50 Cycle Service • 4950 Watts, 208 Volts, 3 Phase, 60 Hz. o See page E-10 for accessory details. • 4950 Watts, 240 Volts, 3 Phase, 60 Hz. Probe Power Unit Available at Extra Cost (see page E-6) ®®® CCLASSIFIED CLASSIFIED TO NSF4 ® 5925 Heisley Road • Mentor, OH 44060-1833 Page E-4.1A Phone: 877/CRESCOR • Fax: 440/350-7267 Sept., 2004 5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267 © Crescent Metal Products, Inc. 1998 All rights reserved. Litho in U.S.A. ® CO-151-HW-UA-6B In line with its policy to continually improve its products, CRES COR reserves the right to change materials and specifications without notice. SHORT FORM SPECIFICATIONS Cres Cor AquaTemp Roast-N-Hold Convection Oven Model CO-151-HW-UA-6B. Removable power unit 20 ga. 304 stainless steel, recessed control panel. Cabinet 22 ga. 304 stainless steel. Stainless steel internal frame; coved corner interior. 16 ga. stainless steel water reservoir, 4 gallon capacity. Fiberglass insulation in sides 2”; back, door and base 1-1/2”. 22 ga. 304 stainless steel door, ceramic magnetic latch, heavy duty hinges. (6) sets universal angles for multiple pan sizes and spacing. One piece base .125 aluminum. 5" swivel modulus casters, Delrin bearings. Load capacity 250 lbs. each. 4950 Watts, Volts, 60 Hz., ____ Phase. 2 year parts warranty. Provide the following accessories: ___ ___ ___ UL, CUL, UL Sanitation listed. CABINET: • Body: 22 ga. 304 stainless steel. • Reinforcement: Internal framework of 16 ga. stainless steel. • Insulation: Fiberglass, thermal conductivity (K factor) is .23 at 75°F. 1-1/2" in back wall, door, base; 2" in side walls. • Water pan: 4 Gallons; 16 ga. 304 stainless steel with 1850 Watt heater and with petcock drain; mounted to base. • Drip trough: Formed 18 ga. stainless steel; mounted to lower front of cabinet. • Air tunnel: 20 ga. stainless steel, lift-out type, mounted on rear wall. • Work top: 18 ga., 304 stainless steel. BASE: • One piece construction, .125 aluminum. • Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. 250 lbs. each, temp. range -45°/+180°F. Delrin bearings. Front casters equipped with brakes. DOOR: • Field reversible. • Formed 22 ga. 304 stainless steel. • Latch: Chrome plated zinc with composite handle, ceramic magnetic type; mounted inboard. • Hinges: Heavy duty chrome plated zinc, mounted inboard. • Gasket: Perimeter type, silicone. • Pan stop: Embossed. PAN SLIDES: • Stainless steel wire universal angles (.306 dia.) mounted on lift-out posts. • 6 sets of angles adjustable on 1-1/2" centers. • Grids (3): Nickel chrome plated steel, raised wire 17" x 25". POWER REQUIREMENTS AVAILABLE: • 4950 Watts, 208 Volts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service. • 4950 Watts, 240 Volts, 60 Hz., 1 phase, 21 Amps., 30 Amp. service. • 4950 Watts, 208 Volts, 60 Hz., 3 phase, 15 Amps., 20 Amp. service. • 4950 Watts, 240 Volts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service. POWER UNIT COMPONENTS: (refer to above dra...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category