Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
2. Do the necessary settings. 3. Touch and hold and at the same time. Loc goes on in the display. The Control Lock is on. To deactivate the Control Lock, touch and hold and at the same time. The Control Lock does not prevent you accidentally deactivate the appliance. If you deactivate the appliance, the Control Lock is off. Settings menu The settings menu lets you to add or remove functions from the main menu (for example: you can set on or off the Residual heat indicator). Settings menu has maximum eight set Additional functions 21 tings (from SET1 to SET8). The number of the settings is different for different models. Look into the table below to see the possible value of each setting. Settings menu Indicator of the setting menu SET1 SET2 SET3 SET4 SET5 SET6 SET7 SET81) 1) Selected models only Description SET+GO RESIDUAL HEAT INDICATOR CLEANING REMINDER KEY TONE FAULTY TONE SERVICE MENU RESTORE SETTINGS TIME EXTENSION Value to set ON/OFF ON/OFF ON/OFF CLIC/BEEP/OFF ON/OFF YES/NO ON/OFF You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds. The display shows "SET1" and "1" flashes. 3. Touch / to set the setting. 4. Touch . 5. Touch / to change the value of the setting. 6. Touch . Automatic switch-off The appliance deactivates after some time: • if you do not deactivate the appliance; • if you do not change the oven temperature. Oven temperature 30°C -115°C 120°C - 195°C 200°C - 245°C 250°C Switch off time 12,5 h 8.5 h 5.5 h 3.0 h To operate the appliance after an automatic switch-off, first deactivate the appliance fully. Brightness of the display There are two modes of display's brightness: • Night brightness - when the appliance is off, the brightness of the display is lower between 22:00 and 06:00; 22 22 Care and cleaning • Day brightness: – when the appliance is on; – if you touch any of the sensor fields during night brightness (apart from ON/OFF), the display goes back to day brightness mode for next 10 seconds; – if the appliance is off and you set the minute minder. When the minute minder function ends, the display goes back to night brightness; Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. CARE AND CLEANING WARNING! Refer to "Safety information" chapter. Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and cleaning agent. • To clean metal surfaces use a usual cleaning agent • Clean the oven interior after each use. Thus you can remove dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner. • Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after each use and let them dry. • If you have nonstick accessories, do not clean them using an aggressive agents, sharp edged objects or dishwasher. It can cause a damage to the nonstick coating. Cleaning the door gasket • Regularly do a check of the door gasket. The door gasket is around the frame of the oven cavity. Do not use the appliance if the door gasket is damaged. Contact the Service Centre. • To clean the door gasket refer to the general information about the cleaning. Stainless steel or aluminium appliances:...
Other models in this manual:Electric Ovens - BP7714000 (1.83 mb)
Electric Ovens - BP7614000 (1.83 mb)
Electric Ovens - BP7614000 (1.83 mb)
Electric Ovens - BP7614000 (1.83 mb)