NW • P.O. Box 849, West Fargo, ND 58078 Email: sales@bearcatproducts.com Fax: 701.282.9522 ШШСИВ Л_ bearVîcat BEARyCAT 3" Chipper/Shredders Specs 270 CC HONDA OHV ENGINE •Fuel consumption is .7 gallons per hour at full load. TWO CHIPPING BLADES High chrome content reversible, heat treated chipper steel blades [3.125" x 2" x .25"] quickly chip limbs up to 2.75" [7.6cm] diameter. The cutting edge is machined at a 45-degree angle for more steel up front. The 45-degree angle also draws the w
DIAMOND SHAPED CHIPPER CHUTE Enables you to insert most irregular limbs even if they have some knobs on them. PNEUMATIC TIRES WITH GREASE ZERKS Wheels feature grease zerks, enabling easy greasing of the hub DIMENSIONS: • SC3270 (70380) - Length: 38", Width: 23", Height: 46" • SC3270T (70580) - Length: 44", Width: 57", Height: 49" DECIBEL LEVELS: • SC3270 (70380) - 111 decibels • SC3270T (70580) - 111 decibels SAFETY • Meets all applicable ANSI safety standards. OPTIONS: • 70089 - Le
There is an ECHO Bear Cat Chipper that will meet your needs through a variety of drives available (gas or diesel engine, PTO, or skid steer), capacities (from 4" to 12") and feed types (gravity or hydraulic). See the chart below for further details on each model. Chipper Capacity (in) Model No. Engine Size (in)(LxWxH) Feed System Feed Sensor Feed Opening (in) Starter Type Weight (lbs) Tires Wheel Base (in) Chipper Disc (in)(DxW)/(lbs) 12 CH123DH 3.3L Kubota Diesel |lBBxB2x10Д Hydraulic Standar
Feed rate is 0 - 150 FPM [0-45 meters/min.]. FEED SYSTEM 15" diameter 45 degree chipping blade edge angle pulls the logs and limbs. Infeed hopper opening is 9"x9" [23cm x 23cm]. Drop-down feed tray with locking safety pin. EASY ACCESS The rotor is accessible through the hinged disc cover, which exposes one half of the disc for easy access to the chipping blades and for easy clean out. HEAVY-DUTY CONSTRUCTION 9"x9" [.95cm] thick steel face plate on the disc housing; .25" [6.35mm] thick s
Minimum 25 gallons per minute (GPM) hydraulic oil flow. G Currently this is true, but in the upcoming year it will become standard D Continuous chipping size rating of 3" refers to the suggested feeding size of limbs for normal operation.
1, 5Д0 rpmF ДBxДбxB7 Self Feed N/A 5.5x7 N/A б00 N/A N/A 20x1.2б/1Д0 A For use on tractors with engine horsepower ratings from 25 hp to 60 hp. E Requires standard-flow hydraulics. Minimum 15 gallons per minute (GPM) hydraulic oil flow. B Continuous chipping size rating of 5" refers to the suggested feeding size of limbs for normal operation. F For use on tractors with engine horsepower ratings from 13 hp diesel and 15 hp gas to 45 hp. C Requires high-flow hydraulics. Minimum 25 gallons per mi
There is an ECHO Bear Cat Chipper that will meet your needs through a variety of drives available (gas or diesel engine, PTO, or skid steer), capacities (from 4" to 12") and feed types (gravity or hydraulic). See the chart below for further details on each model. Chipper Capacity (in) Model No. Engine Size (in)(LxWxH) Feed System Feed Sensor Feed Opening (in) Starter Type Weight (lbs) Tires Wheel Base (in) Chipper Disc (in)(DxW)/(lbs) 12 CH123DH 3.3L Kubota Diesel |lBBxB2x10Д Hydraulic Standar