Login:
Votes - 3, Average rating: 3.3 ( )

User manual Craftsman, model 1692210, 1692231, 1692353, 9000100

Manafacture: Craftsman
File size: 36.29 kb
File name: e0ae4ddc-64b9-1fa4-6972-6feab070133a.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Nos. 1692210, 1692231, 1692353, 9000100 A WARNING Turn off the engine, let the rotor come to a complete stop and disconnect the spark plug wire before assembling the vacuum kit or changing attachments. A WARNING Never remove% adapter from the back of the machine while the machine is running or the rotor is turning. The rotor is pinning just inches away from the adapter iniet. Serious injury will result if you put your fingers or foot in the adapter inlet while the rotor is turning! INSTALLATION 1. Remove the rotor housing cover. Retain the screws. 2. Replace the cover with the adapter {1A or 1 B) using the screws removed in step 1 and washers (15). 3. Twist the coupler (2) onto the end of the hose (4). Insert the coupler into the adapter by aligning the ^WARNING Never operate the machine wWheuft Hte pler/hose assembly or plug comnesft&ti to tihe adapter. arrows (or seams) running along the top of the coupler with those on the adapter. Push fully in and turn until it snaps into place. NOTE: Insert plug (3) into adapter when vacuum attachment is not in use. See Removing the Vacuum Kit on the next page. 4. Slip the grip (12) onto the handle (11). Putting some soap on the handle will make the grip slide on easier. 5. Connect the handle to the nozzle (6) using the screw (10), washers (9) and nut (8). 6. Connect nozzle (6) or leaf tray (5) to the hose,. 7. Securely place hopper lid (14) on hopper. Ref. Qty. Part No. 1A 1 1021100 1B 1 1713522 2 1 1023100 3 1 1025100 4 1 1035100 5 1 1027100 6 1 1030100 7 1 1024100 8 1 1960294 9 1 1921319 IO 1 6041612 11 1 1026100 12 1 1028100 13 1 5001612 14 1 1709404* 15 • Lid c 1019100* 1709467* 1919326 or depends on one lid is packaged per Description Adapter Adapter (European Model) Coupler Plug Hose, 10’x 4” Dia. Leaf Tray Nozzle Ring Nut, Hex, Flange, 1/4-20 Washer, 1/4 Screw, Phillups 1/4-20x1-1/2 Handle Grip, Handle Decal, Danger Hopper Lid (Orange) Hopper Lid (Gold) Hopper Lid (Red) which kit you've ordered. Only kit. *2480 Adjust vacuum strength by turning ring and adjusting opening size. Figure 1. Kit Parts FORM - 1709566 PRINTED IN U.S.A. 12/93-SMI USING THE VACUUM The vacuum kit lets you take full advantage of the vacuum created by the four fan blades on the rotor flywheel. Placing the lid on the hopper directs the suction power to the hose inlet at the bottom of the housing. Use the vacuum kit to conveniently rake dry leaves and grass clippings into the leaf tray, where the material is sucked through the vacuum hose, shredded in the shredding chamber and expelled out the discharge chute. The hopper lid must be in place for the vacuum to work properly. The clear vacuum hose allows you to monitor the flow of material. The vacuum kit works best on dry leaves, The nozzle and handle can be attached to the end of the hose for, hard to reach places. The strength of the vacuum can be adjusted by turning the sleeve on the nozzle end. Open the sleeve fully for m...

Other models in this manual:
Chippers - 1692210, 1692231, 1692353, 9000100 (36.29 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category