Votes - 2, Average rating: 3.5 ( )

Manafacture: Simplicity File size: 36.64 kb File name: Language of manual:

Only kit. *2480 Adjust vacuum strength by turning ring and adjusting opening size. Figure 1. Kit Parts FORM - 1709566 PRINTED IN U.S.A. 12/93-SMI USING THE VACUUM The vacuum kit lets you take full advantage of the vacuum created by the four fan blades on the rotor flywheel. Placing the lid on the hopper directs the suction power to the hose inlet at the bottom of the housing. Use the vacuum kit to conveniently rake dry leaves and grass clippings into the leaf tray, where the material is sucked through the vacuum hose, shredded in the shredding chamber and expelled out the discharge chute. The hopper lid must be in place for the vacuum to work properly. The clear vacuum hose allows you to monitor the flow of material. The vacuum kit works best on dry leaves, The nozzle and handle can be attached to the end of the hose for, hard to reach places. The strength of the vacuum can be adjusted by turning the sleeve on the nozzle end. Open the sleeve fully for minimum suction power to vacuum leaves over a garden area. VACUUMING TIPS • Keep the hose straight for best performance. • Rake leaves into the tray at a steady rate so that the engine or motor runs at an even level. For best results, do not cram the tray full of leaves. • Avoid items, such as twigs, that can get caught in the hose. • If material is wet, allow to dry before vacuuming. REMOVING THE VACUUM KIT 1. When not using the vacuum kit, turn off the engine, let the motor come to a complete, stop and disconnect the spark plug wire. 2. Rotate the coupler/hose assembly until the seams line up on top, pull until it clicks then unscrew and remove. 3. Insert the plastic plug (3) into the adapter and twist until it seats completely FORM . 1709566...

Download now

Please, enter two numbers from picture: