Votes - 4, Average rating: 4.3 ( )

Manafacture: Fellowes File size: 200.58 kb File name: Language of manual:

Operation DM-4 DM-6 DM-C (without lights) • Follow instructions for sheet capacity. (See Table A) • Position paper over entry. • Depress power switch to the ON (cutting system. • Return the power switch to the OFF (O) position • Follow instructions for sheet capacity. (See Table A) • Depress the power switch to the ON (I) position to activate mode. *Green Ready light will come on. • Shredder automatically starts when paper is placed in the entry and stops when finished shredding. • If the machine is not properly seated on the basket, the red light will come on. PS60 PS60CC PS70 PS75 PS80 DM-C (with lights) Cleaning All Models • Unplug the unit from the wall before cleaning. • Housing can be cleaned with a cloth, dampened with a mild soap and water solution. Sheet Capacity and Usage • Do not exceed recommended sheet capacity for your model. • Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded. • Clips and staples increase the thickness and may decrease sheet capacity. A B C D E F Model: US 20# Paper Sheets per Pass 120V/50Hz 64 GSM Sheets per Pass 100V/50Hz 80 GSM Sheets per Pass 230V/50Hz 80 GSM Sheets per Pass 240V/50Hz PS60 PS70 PS75 DM-4 DM-6 12 12 12 12 12 14 14 14 N/A N/A 12 12 12 N/A N/A 12 12 12 N/A N/A PS60CC PS80 DM-C 7 7 7 9 9 N/A 7 7 N/A 7 7 N/A Different paper weights and electrical currents will affect capacity. TABLE A 3 A B C D E F A B C D E F Safety & The PS60CC, PS80, DM-that, if allowed the shredder to jam. Follow will accumulate and to keep your • Do not allow the basket to overfill. The power of this shredder will compress into the basket even when it is full. The life of your operate with particles packed around it. • Reverse the shredder often. Reversing helps the shredder Empty basket if it is full before reversing. Oil the cutters: When... • Every second or third time you empty the basket; • If the shredder’s cutting capacity is diminished; • If the cutting cylinders stop with a squeak or a rubbing sound after power is removed. How... Use Powershred Lubricant #35250 or a suitable alternative with an extension nozzle. Alternatives can be 3 in 1 or Sewing Machine Oil. Oil must be non-flammable material and a non-degreaser! spray. Accelerants are combustible. See order form in this manual. Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system forward for a few seconds. (Cross-cut machines with auto start: block the photo eye with a piece of paper in order to run the cutting system forward). Then, depress the reverse button and run the cutting system for a few seconds. Repeat the procedure. Safety of PS60CC, PS80, DM-C • Do not operate PS60CC, PS80, DM-C without the basket it was shipped with. • Do not attempt to defeat the safety interlock switch. • PS 80 only: Do not use without the safety flap. Injury may result. Paper Jams 1. Immediately return power switch to OFF (O) position. 2. Depress power switch to the REVERSE (R...

Download now

Please, enter two numbers from picture: