Login:
Votes - 2, Average rating: 4.5 ( )

User manual Antec, model EA-430D

Manafacture: Antec
File size: 56.9 kb
File name: 60da9d83-fd6d-427c-bf88-75cbd8bfa73b.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Make sure you turn the switch to the ON (I) position before you boot up your computer for the first time. In normal operation there is no need to turn the switch to the OFF (O) position since the power supply is equipped with a soft on/off feature, which turns your computer on and off through the soft switch on your computer case. You may need to turn the switch to the OFF position occasionally should your computer crash and you cannot shut it down through use of the soft switch. Installation: 1. Turn off the hard power switch, if any, on your old power supply. 2. Open your computer case according to the directions provided in your case manual. 3. Disconnect all power connectors from the motherboard and from the peripherals devices such as case fans, hard drives, optical drives, floppy drives, etc. 4. Disconnect the power cord from your old power supply. 5. Remove the existing power supply from your computer case and replace it with your new Antec EarthWatts power supply. 6. Connect the AC power cord to the power supply. __ r-N ii Picture 1 Picture 2 7. Connect the 24-pin Main Power Connector and the 4-pin + 12V connector to your motherboard as needed. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 1 and 2). 8. Connect the peripheral power connectors to devices such as hard drives, optical drives, etc. 9. Connect the Serial ATA connectors if you are using a Serial ATA hard drive. 10. Connect the PCI Express power connector to your PCI Express graphic card as needed. 1 11. Turn the hard switch on the Antec power supply to the ON position. 12. Close your computer case. Run Cool, Run Reliably, Run with 80 PLUS® About 80 PLUS®: 80 PLUS® is an innovative, electric utility-funded incentive program to integrate more energy-efficient power supplies into desktop computers and servers. The 80 PLUS performance specifications require power supplies in computers and servers to be 80% or greater energy efficient. This makes an 80 PLUS certified power supply at least 33% more efficient than current power supplies. 80 PLUS certified power supplies: • Achieve energy savings, up to $70 (55 Euro) over the life of a desktop computer • Reduce a room's cooling load, increasing comfort and saving up to 30% • Increase computer system reliability and save on maintenance costs by as much as 40% • Minimize the need for noisy fans, creating a quieter environment • Save on construction - saves hundreds of dollars in electrical system upgrades • Allow more computers on the same branch circuit • Save the environment - prevent pollution by reducing energy consumption 2 Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe + 31 (0) 10 462-2060...

Other models in this manual:
Power Supply - EA-380 (56.9 kb)
Power Supply - EA-500D (56.9 kb)
Power Supply - EA 380 (56.87 kb)
Power Supply - EA 430 (56.87 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category