If your package arrived without any of the following items, please contact us right away! 1) Owner’s Manual 2) Battery Cord is located in bag on back of seat; charger is located in battery box 3) Batteries 4) Seat arm rests 5) 2 Keys 6) Buzzaround™ scooter DISCLAIMER Golden Technologies, Inc. is not and cannot be held responsible for any damage or injury incurred due to improper or unsafe use of the Golden Buzzaround™ scooter. Golden Technologies, Inc. specifically disclaims responsibility for a

UL and CSA certifications insure that our chairs are the safest available. We believe that this product is made from the highest quality components available, is engineered to give you maximum service with minimum maintenance, and is backed up with the strongest warranty in the industry. We hope that you enjoy years of pleasurable use of your Golden Technologies chair and that this chair becomes a true assist to you in both sitting down and standing up. Please take a few moments to review this m

If your package arrived without any of the following items, please contact us right away! 1) Owners Manual 2) Battery Charger 3) Batteries (If ordered) 4) Seat Arm Rests 5) Keys 6) Avenger™ Scooter DISCLAIMER Golden Technologies, Inc. is not and cannot be held responsible for any damage or injury incurred due to improper or unsafe use of the Golden Avenger™ scooter. Golden Technologies Inc. specifically disclaims responsibility for any bodily injury or property damage that may occur during any u

If it is a self-closing door, it will close behind you. 8. If it is not a self-closing door, pull it closed behind you. Ramps Because of the American Disabilities Act (ADA), many buildings are fitted with ramps that provide access for scooters and for other mobility vehicles. Page 17 Buzzaround Owner’s Manual -Updated 092605 RIDING YOUR BUZZAROUND™ When proceeding up any ramp, curb, or incline: • Lean forward in your seat to move your center of gravity forward for maximum stability and safety. I

See #2 on figure 8. 3. Position the seat post at the desired height while aligning the holes in the seat post and the seat pedestal. 4. Reinstall the nut and bolt. 5. Replace the seat back onto the seat pedestal. Figure 8. Seat Height/Rotation Adjustment Figure 6. Armrest Width Adjustment Figure 7. Flip-up/Angle Adjustment 18 LiteRider™ Owner’s Manual V. OPERATION Rev.A_122810 FREEWHEEL MODE Your Golden LiteRider™ is equipped with a freewheel lever that can set your scooter in or out

Place the assembly as shown next to the frame. The fork has to locate into the pins as shown. The pins are marked in red. SAFETY NOTICE Lift the frame over the forks. Line up the pins and lower the frame. When both sets are located push the frame down. You will hear a “click” as the assembly locks. If the transaxle is not located correctly the vehicle will not operate. Assemble the remaining sections in reverse order of dismantling. Golden Liteway GL-100 Owner’s Manual Revised 11/06 Battery Char

AVOID THIS DANGER AT ALL TIMES BY STEERING A WIDE ARC AROUND CORNERS AND OBSTACLES. ALSO, TO AVOIDE THE RISK OF TIPPING, REDUCE SPEED BEFORE NEGOTIATING ANY TURNS. Steering in a tight spot If you must steer in a tight spot, such as entering a doorway or when turning around: 1. Bring your Avenger™ to a full stop. 2. Turn the speed control dial to the slowest setting (Fully counter clockwise) 3. Turn the tiller to the direction in which you wish to drive. 4. Press gently on the appropriate t

Avoid this danger at all times by decelerating and steering a wide arc around corners and obstacles. Steering in a Tight Spot If you must steer in a tight spot, such as entering a doorway or when turning around: 1. Bring your Companion to a full stop. 2. Set speed at a low level. 3. Turn the tiller to the direction in which you wish to drive. 4. Press gently on the appropriate thumb lever. This will make your Companion turn very sharply. For more information on dealing with obstacle and tight sp

Push and then release the clamp on the left post of the headrest while you are pulling up or pushing down on the head rest. See figure 10. 2. The headrest will “click” to a stop in one of the preset positions. 3. Repeat step 1 until the headrest is at the desired height. Backrest Angle Adjustment Lever Headrest Clamp Figure 10 Figure 11 BACKREST ANGLE ADJUSTMENT NOTE: The backrest can be folded down to minimize chair height during transport. 1. Pull up on the adjustment lever (see figure 11) and

2. Never put your power chair in freewheel mode while you are operating your power chair. THERMAL ROLLBACK Your Compass™ is equipped with a safety system. A microprocessor monitors the operating temperatures of the controller. In the event of excessive heat occurring in the controller, the controller will decrease the speed of your chair. This is done to reduce the load on the electrical system and allow the components to dissipate heat. The controller will automatically set the chair’s speed ba