Votes - 3, Average rating: 4 ( )

Manafacture: Invacare File size: 177.25 kb File name: Language of manual:

5. If necessary repeat STEPS 1-4 on remaining contracture assembly. FIGURE 4- CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT Angle Adjustment Bracket Mounting Hole Locknut Contracture Support Mounting Screw USING THE OPTIONAL QUICK RELEASE PIN (FIGURE 5) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in the SAFETY SUMMARYof this instruction sheet. NOTE: The Quick Release Pin replaces the mounting screw that is used to lock the angle adjustment of the contracture support. NOTE: If not installed attime of shipment, the quick release pin must be installed by a qualified technician only, using a 1/8-inch pop rivet. 1. Press the button on the quick release pin and insert through the contracture support and the angle adjustment bracket. 2. If necessary adjust the angle of the contracture assembly. Refer to CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT in this instruction sheet. 3. Repeat STEPS 1-2 on the remaining contracture assembly. Angle Adjustment Bracket Pop Rivet Button Contracture Support Quick Release Pin FIGURE 5 - USING THE OPTIONAL QUICK RELEASE PIN ANGLE ADJUSTMENT OF THE CONTRACTURE FOOTPLATE (FIGURE 6) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in the SAFETY SUMMARYof this instruction sheet. 1. Loosen, but DO NOT, remove the two (2) flat screws, washers and locknuts that secure contracture footplate to the footplate hinge. 2. Tilt the contracture footplate UP/DOWN to achieve desired angle. 3. Retighten the two (2) flat screws, washers and locknuts that secures the contracture foot plate to the footplate hinge. 4. If necessary repeat STEPS 1-3 on remaining contracture footplate. Contracture Assembly Footplate Hinge only. FIGURE 6 - ANGLE ADJUSTMENT OF THE CONTRACTURE FOOTPLATE Contracture Footplate Flat Screws NOTE: Mounting hardware shown removed for clarity Washers Lock Nuts 3 CONTRACTURE FOOTPLATE DEPTH ADJUSTMENT (FIGURE 7) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in theSAFETY SUMMARYof this instructionsheet. NOTE: Observe the angle of the contracture footplate for reinstallation. 1. Remove the two (2) flat screws, washers and locknuts that secure the contracture footplate to the footplate hinge. 2. Move the contracture footplate to one (1) of four (4) mounting hole. 3. Reinstall the two (2) flat screws, washers and locknuts that secures the contracture foot plate to the footplate hinge. Flat Screws Mounting Hole Contracture Footplate Washers Footplate Hinge Lock Nuts FIGURE 7 - CONTRACTURE FOOTPLATE DEPTH ADJUSTMENT CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT (FIGURE 8) NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in theSAFETY SUMMARYof this instructionsheet. 1. Remove the mounting screw, two (2) coved washer, washer and locknut that secure the footplate bracket to the contracture support. 2. Move the footplate bracket UP/DOWN to achieve desired height. 3. Align the mounting hole in the footplate bracket with one (1) of seven (7) mounting holes on the contracture support. 4. Secure t...

Download now

Please, enter two numbers from picture: