No. Part No. Qty. Description Ref. No. Part No. Qty. Description 1 48646 1 Hitch Tube, R.H. 42 43661 4 Bolt, Hex 1/4-20 x 1" Lg. 2 48645 1 Hitch Tube, L.H. 43 25102 2 Dust Cover 3 24950 1 End Plate, R.H. 44 48471 2 Tube, Hopper Frame (Rear) 4 24951 1 End Plate, L.H. 45 48467 2 Tube, Upper Hopper Frame (Front) 5 24989 1 Wrapper 46 48728 2 Tube, Lower Hopper Frame (Front) 6 43175 2 Bolt, Hex 1/4-20 x 1/2" Lg. 47 48402 4 Plastic Plug 7 C-9M5732 6 Rivet, Pop 48 48396 1 Hopper Bag 8 23887 1 B

Finally, tighten the two bolts fastening the hitch brackets to the hitch tubes. 7. (Figure 4 or 5) Assemble the hitch pin (Y), two 3/4" spacers (U) and the 1/8" hair cotter pin (N) to the hitch brackets. 4 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK NUT (G) 3/4" SPACER (U) HITCH BRACKET HITCH BRACKET (STRAIGHT) 1/8" HAIR COTTER PIN (N) HITCH PIN (Y) CURVED HEAD BOLT (C) 5/16" HEX NUT (H) BOWED WASHER (L) 5/16" LOCK WASHER (K) HEIGHT ADJUSTMENT HANDLE GRIP 6 5 7 5/16" x 2" HEX BOLT (B) 5/16" HEX LOCK

45-02181 26" LEAF/LAWNSWEEPER Safety Assembly Operating Maintenance Repair Parts CAUTION: Read Rules for Safe Operation and Instructions Carefully thefastest way to purchase parts PRINTED IN USA FORM NO. 40261 (4/24/07) SAFETY RULES Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using this equipment. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN AC

See figure 13. HINT: Push in on hex bolts as you tighten to form threads. 23. Connect the hose adapter to the engine housing by fastening three wing nuts to the pre-assembled bolts in the engine housing. See figure 13. 25. Place the hose hanger rod down into the hose hanger bracket on the impeller housing assembly. See figure 15. NYLON WASHERWING NUT5/16" X 3/4" HEX BOLT(SELF TAP) FIGURE 15 FIGURE 13 CLAMPHOSEHOSE ADAPTER(NOZZLE) 29. Assemble the hitch plate to the tractor hitch if: a. Your trac

Modelo No. Modele No. 45-03371 30" LAWNSWEEPER BARREDORA DE CESPED DE 76 cm BALAYEUSE DE 76 cm CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de Repuesto ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. • Securit

Be aware of changing conditions on slopes. 1. Inspect the Mow-N-Vac to make sure all covers (rear door, vinyl boot, elbow, hose adapter (nozzle), hose and deck adapter are properly attached. 2. Check tires for proper inflation (12 - 14 lbs). 3. Check oil and gas in Mow-N-Vac engine. 4. Begin operation at low speed, adjusting forward speed to match grass height and/or moisture condition to prevent clogging. 5. Do not attempt to vacuum up any material other than vegetation found in a normal yard,