Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
MENU FEATURES OFF TIMER When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen. You can display the OFF TIMER menu again to confirm or change the remaining time. . About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. TV channel presetting To register the TV channels automatically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. MENU INSTALL . 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5/. button to select AIR or CABLE, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered automatically. 4 “SETUP TOUR RESTART?” appears. To start the Press the MENU/OK button. SETUP TOUR Then proceed to step 5 of “Setting up your TV” on page 7. To skip the Press the Red button. SETUP TOUR 5 The CHANNEL SUMMARY menu appears. For details of “SETUP TOUR”, see page 7. CHANNEL SUMMARY You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL M button. 1 Display the INSTALL menu. MENU INSTALL . 2 Choose CHANNEL SUMMARY, then press the MENU/OK button. CHANNEL SUMMARY menu appears. ¦ ¦ ¦ ¦ 3 Choose the channel which you want to skip. The skip can be set to all channels of AIR (CH02-CH69) and CABLE (CC01CC125). 4 Press the yellow button to skip the channel. To cancel the skip, press the blue button. 5 Press the MENU/OK button to exit the menu. . About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Additional preparation The illustrations shown in this section are for AV-21YN14 only, which are used for explanation purposes. Your TV may not look exactly the same as the illustration. Before connecting Front of the TV • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied. Rear of the TV Headphones Camcorder or TV game VCR (for playing) DVD player (Composite signals) VCR (for recording) Troubleshooting If a problem occurs when you are using the TV, check the following troubleshooting guide before calling for repair. No picture, • Deactivate the BLUE BACK function Cannot operate the • The batteries may be exhausted. no sound if it is turned on. remote control Replace with new batteries (see page 6). Snowy picture • Check the antenna cable and its • Ensure that you are operating the connection with the TV. remote less than seven meters from Stripes appear • Interference occurs caused by other the front of your TV. on the picture devices such as an amplifier, Cannot operate the • Press TV/VIDEO button to return to personal computer, or a hair drier. menus TV mode and try operating the Move such devices away from your menus. TV. Cannot operate the • Deactivate the CHILD LOCK Double-pictures • Interference occurs caused by front control function if it is turned on (see page (ghosting) occur signal reflecting from mountains or buttons 11). building. Try to adjust the antenna direction or use a better directional-TV turns off • This may due to the AUTO SHUT ity antenna. suddenly OFF function is activated. Press the POWER button to turn on the TV. Poor picture • Choose the appropriate color system. Refer to “COLOR SYSTEM” Color patches • This may due to a magnetized on page 8. appear at the device such as a speaker near to • Adjust the COLOR or BRIGHT corner of the your TV. Keep the device apart setting. Refer to “Adjusting the screen from your TV. Alternately, you can picture - USER” on page 8. also use the magnetically shielded speaker. White and bright • Inevitable phenomenon due to the still image look as nature of the picture tube. This is Image takes a • A short periode of time is required if it were colored not a malfunction. short period to be to stabilize the image. displayed This is not a malfunction. Top of the image • This is due to the condition of the from software video signal whereby the image TV emits a • This is due to a sudden change in products or video was not recorded properly. crackling sound temperature and it is not a tape is distorted This is not a malfunction. malfunction. If the crackling sound is too frequent, request your service technician for inspection. Feel a slight • This is due to the static electricity electric shock of the picture tube and it will not when touching the harm the human body. This is not a TV screen malfunction. Specifications TV RF systems M Color systems TV mode: NTSC 3.58 MHz VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz External input / output VIDEO-1: VIDEO input, AUDIO input VIDEO-2: VIDEO input, AUDIO input, OUTPUT: VIDEO output, AUDIO output Headphone jack: stereo...
Other models in this manual:Lawn Sweepers - AV-20NN14 (288.79 kb)
Lawn Sweepers - AV-21CN14 (288.79 kb)
Lawn Sweepers - AV-21YN14 (288.79 kb)