Votes - 0, Average rating: 4
(
)
)
|
manual abstract
You must read these instructions for use and the machine’s safety instructions carefully. 1.1 Symbols The following symbols appear on the machine. They are there to remind you of the care and attention required in use. This is what the symbols mean: Warning! Read the instruction manual and the safety manual before using the machine. Warning! Do not insert your hands or feet under the cover when the machine is in operation. Warning! Watch out for discarded objects. Keep onlookers away. Warning! Before starting repair work, remove the spark plug cable from the spark plug. 1.2 References 1.2.1 Figures The figures in these instructions for use are num bered 1, 2, 3, etc. Components shown in the figures are marked A, B, C, etc. A reference to component E in figure 5 is written “5:E”. 1.2.2 Headings The headings in these instructions for use are num bered in accordance with the following example: “2.3.2” is a subheading to “2.3” and is included under this heading. When referring to headings, only the number of the heading is normally specified. E.g. “See 2.3.2”. 2 DESCRIPTION 2.1 General The cutting deck is intended for use on Stiga’s 4 wheel drive Park machines. The cutting deck is supplied in one of the following versions: • With manual adjustment of cutting height. • With electrical adjustment of cutting height. 2.2 Controls, 110/125 Combi Pro 2.2.1 Cutting height adjustment The cutting height can be adjusted between 25 and 90 mm. Electrical cutting height adjustment The setting can be adjusted infinitely variably using a switch on the machine. Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever. See fig. 1. 2.2.2 Incline forwards The rear section of the cutting deck can be raised 12 mm by moving the two pins down one hole from the basic setting. See fig. 2. 2.2.3 Rear mounting The cutting deck’s rear section is secured with the pins in fig. 2. 2.2.4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks. One snap hook is intended for the working position and can be moved in the chain links to set the lifting force. The other snap hook is intended for the washing position. 2.3 Controls, 107 M HD 2.3.1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm. Electrical cutting height adjustment The setting can be adjusted infinitely variably using a switch on the machine. Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever. See fig. 9. 2.3.2 Incline forwards The rear section of the cutting deck can be raised 12 mm by moving the two pins down one hole from the basic setting. See fig. 13. ENGLISH EN ENGLISH EN 2.3.3 Rear mounting The cutting deck’s rear section is secured with the pins in fig. 13. 2.4 Controls, 92/107 M 2.4.1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm. The setting can be adjusted to a number of fixed positions using the lever. See fig. 9. 2.4.2 Incline forwards The cutting deck’s rear section can be raised infinitely variably. Each line (12:J) corresponds to a raise of 5 mm. The setting is locked with the screws (12:K). 2.4.3 Rear mounting The cutting deck’s rear section is secured with the catches (12:L). 2.4.4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks. One snap hook is intended for the working position and can be moved in the chain links to set the lifting force. The other snap hook is intended for the washing position. 2.5 Controls, 121 M 2.5.1 Cutting height adjustment The cutting height can be adjusted between 30 and 85 mm. Electric cutting height adjustment The setting can be adjusted infinitely variably using a switch on the machine. Manual cutting height adjustment The setting can be adjusted to a number of fixed positions using the lever (7:G). 2.5.2 Incline forwards The cutting deck’s rear section can be raised infinitely variably. The setting is locked with the screws (7:H). 2.5.3 Rear mounting The cutting deck’s rear section is secured with the pins (7:I). 3 ASSEMBLY 3.1 Installing the 110/125 Combi Pro 1. Place the cutting deck in position in front of the machine. 2. Install the following components on both wheel axles: • Washer (3:B). • Deck mount (3:C). • Washer (3:B). • Circlip (3:A). 3. Remove the pins and the washers on both sides. See fig. 2. 4. Screw the arms into each other. See fig. 4. 5. Suspend the cutting deck in the implement lifter. See fig. 14. 6. If the deck has electrical cutting height adjustment, connect the cable to the machine’s front right socket. See fig. 15. 3.1.1 Belt, 110/125 Combi Pro The cutting deck’s rear section should rest on the floor (it should not be lifted or secured). Install the belt as follows: 1. Set the maximum cutting height. 2. Remove the belt cover (5:E). The number in the figure indicates the key width. 3. Remove the belt guide (5:F). 4. Locate the belt around th...