Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
Walk, never run when using the appliance. Do not pull the appliance towards you or walk backwards when using the appliance. Switch on the appliance according to instructions and with your feet well away from the blade. Do not tilt appliance when switching it on, except if the appliance has to be tilted for starting. In that case, do not tilt the appliance more than absolutely necessary and lift only the part that is away from the operator. Always ensure that both hands are in the operating position before returning the appliance to the ground. Switch off the appliance and wait for the blade assembly to stop running if the appliance has to be tilted for transportation when crossing surfaces other than grass, and when transporting the appliance to and from the area to be mowed. Do not lift or carry the appliance until the blade has come to a complete standstill. Keep your hands and feet well away from the blade. Do not put your hands or feet near or under rotating parts. Keep away from discharge openings at all times. Switch off, remove the plug from the socket and ensure that moving parts have stopped rotating before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance or clearing a blockage. If the appliance starts to vibrate abnormally or if you hit a foreign object, switch the appliance off and remove the plug from the socket. Check for any damage to the appliance. Take care to keep the mains cable away from the blade. Always be aware of the position of the cable. The motor will continue to run for a few seconds after switching the appliance off. Never attempt to force the blade to come to a standstill. Maintenance and storage Before use, check the appliance for damaged or defective parts. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the appliance will operate properly and perform its intended function. Never use 13 ENGLISH the appliance when any guard or enclosure is damaged or not in place. Do not use the appliance if any part is damaged or defective. Do not use the appliance if the switch does not turn it on and off. Have any damaged or defective parts repaired or replaced by an authorised repair agent. Check the cable frequently for damage. If the cable is damaged, it must be replaced by an authorised repair agent in order to prevent a hazard. Inspect extension cables periodically. Replace a damaged extension cable immediately. Keep all nuts, bolts and screws on the appliance tight to ensure a safe working condition. Check the grass bag for wear or damage and replace it if necessary. Never use the appliance without the grass bag. When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances. Ensure that only replacement cutting means of the right type are used. Use only Black & Decker recommended spare parts and accessories. Additional safety instructions for Lawnmowers This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Black & Decker Service Centre or an equally qualified person in order to avoid a hazard. If the supply cord is replaced by an equally qualified person, but not authorized by Black & Decker, the warranty will lose effect. Electric safety can be further improved by using a highsensitivity 30 mA residual current device (RCD). Extension cables & class 1 product A 3 core cable must be used as your tool is earthed and of class 1 construction. Up to 30m (100 ft) can be used without loss of power. Features 1. Switch box 2. On/off switch 3. Lock-off button 4. Upper handle 5. Lower handle 6. Grass bag 7. Height adjustment 8. Motor cover 9. Carry handles Assembly Warning! Before assembly, make sure that the appliance is switched off and unplugged. Fitting the lower handle (fig. B) Remove the screws (14) from the lower handle (5) before assembly. Insert the ends of the lower handle (5) into the corresponding holes in the mower. Press the handle down as far as it will go. Secure the handle using the screws (14). Assembling the upper handle (fig. A) Make sure that the cable restraint loop (22) is fitted to the upper handle prior to assembly. Fit the lower handle part (5) to the upper handle (4) using the knobs (12), washers (11) and screws (10) as shown. Securing the motor cable (fig. C) The motor cable has...
Other models in this manual:Lawn Mowers - GR3800 (1.32 mb)