Votes - 3, Average rating: 4.7 ( )

Manafacture: Flymo File size: 9.4 mb File name: Language of manual:

Photos and specs  Flymo  MULTIMO 420XC

6. Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine including cable and any extension cables used. A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase. All of the centres listed stock genuine Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna UK Ltd. in any manner whatsoever. PAGE 10 Easi-Reel Cable Winder (XC models only) Storing your cable in the Easi-Reel cable winder 1. Insert the female connector into the centre of the cable winder (Y1) 2. Place the cable under the cable guide (Y2) 3. Turn the cable winder (Y3) until all of the cable is wound in.(Y4) Unwinding the cable before re-use 1. Pull the cable by the plug and unwind the cable fully. • Ensure that the cable is released from the cable guide (Y2) before using your machine. • Ensure cable is not entangled with any other cables and that it is not trapped in any parts of the product. Y1 Y2 Y3 Y4 Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacturewithin the guarantee period, Husqvarna UK Ltd., through itsAuthorised Service Repairers will effect the repair or replacementto the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer. (b) Proof of purchase is provided. (c) The fault is not caused by misuse, neglect or faultyadjustment by the user. (d) The failure has not occurred through fair wear and tear. (e) The machine has not been serviced or repaired, taken apart or tampered with by any person notauthorised by Husqvarna UK Ltd. (f) The machine has not been used for hire. (g) The machine is owned by the original purchaser. (h) The machine has not been used commercially. * This guarantee is additional to, and in no way diminishes the customers statutory rights. Failures due to the following are not covered, therefore itis important that you read the instructions contained inthis Operator's Manual and understand how to operateand maintain your machine: Failures not covered by guarantee * Replacing worn or damaged blades. * Failures as a result of not reporting an initial fault. * Failures as a result of sudden impact. * Failures as a result of not using the product inaccordance with the instructions and recommendations contained in this Operator'sManual. * Machines used for hire are not covered by thisguarantee. * The following items listed are considered as wearingparts and their life is dependent on regularmaintenance and are, therefore not normally subjectto a valid warranty claim: Blades, Electric Mains cable * Caution! Husqvarna UK Ltd. does not accept liability under thewarranty for defects caused in whole or part, directlyor indirectly by the fitting of replacement parts oradditional parts that are not either manufactured orapproved by Husqvarna UK Ltd., or by the machinehaving been modified in any way. EC Declaration of Conformity Husqvarna AB, 561 82, Huskvarna, Sweden Declare under our sole responsibility that the product(s); Category............................Electric Rotary Lawnmower Type(s) ............................MM340XC, MM360, MM360XC, MM420, MM420XC Identification of Series.......See Product Rating Label Year of Construction..........See Product Rating Label Conforms to the essential requirements & provisions of the following EC Directives: 98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC based on the following EU harmonized standards applied: EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3 The maximum A weighted sound pressure level LpA at the operator’s position, recorded on a sample of the above product(s) corresponds to the Level given in the table. The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s) corresponds to the Value ah given in the table. 2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated figures. Conformity Assessment Procedure.................. Annex VINotified Body.................................................... Intertek, Cleeve RoadLeatherhead, SurreyKT22 7SB, England Newton Aycliffe 25/11/2009M.Bowden Research & Development DirectorHusqvarna UK Ltd. Keeper of technical documentation TypeMM340XC MM360 MM360XC MM420 MM420XC Width of Cut (cm)34 36 36 42 42 Speed of Rotation of Cutting Device (rpm)3,8503,8503,8503,600 3,600 Power (kW)1.5 1.5 1.5 1.7 1.7 Measured Sound Power LWA (dB(A)) 93 93 93 95 95 Guaranteed Sound Power LWA (dB(A)) 96 96 96 96 96 Level (dB(A)) 80.4 80.4 80.4 84.9 84.9 Value ah (m/s2) 1.56 1.56 1.56 1.53 1.53 Uncertainty K of ah (m/s2) 1.5 1.5 1.5 1.5 1.5 Weight (Kg) 12.8 12.4 12.8...

Download now

Please, enter two numbers from picture: