Votes - 1, Average rating: 3 ( )

Manafacture: Flymo File size: 6.08 mb File name: Language of manual:

-before leaving the product unattended for any period; 9. Switch off, remove plug from mains and examine -before clearing a blockage; electric supply cable for damage or ageing before -before checking, cleaning or working on the appliance; winding cable for storage. Do not repair a damaged -if you hit an object. Do not use your product until you cable, replace it with a new one. Use only Flymo re-are sure that the entire product is in a safe operating placement cable. condition.; 10. Always wind cable carefully, avoiding kinking. -if the product starts to vibrate abnormally. Check immedi11. Never carry the product by the cable. ately. Excessive vibration can cause injury. 12. Never pull on the cable to disconnect any of the plugs. Maintenance and storage 13. Use only on AC mains supply voltage shown on the 1. Keep all nuts, bolts and screws tight to be sure the product rating label. lawnmower is in safe working condition. 14. Flymo Products are double insulated to EN60335. 2. Check the grassbox frequently for wear or deterioration. Under no circumstance should an earth be connected 3. Replace worn or damaged parts for safety. to any part of the product. 4. Only use the replacement blade, and blade bolt speci- Preparation fied for this product. 1. While using your product always wear substantial 5. Be careful during adjustment of the product to prevent footwear and long trousers. entrapment of the fingers between moving blades and 2. Make sure the lawn is clear of sticks, stones, bones, wire fixed parts of the machine. and debris; they could be thrown by the blade. 6. Store in a cool dry place and out of reach of children. 3. Before using the machine and after any impact, check for Do not store outdoors. CABLES - IMPORTANT • Use only 1.00mm2 size cable up to 40 metres length maximum. Maximum rating : 1.00mm2 size cable, 10 amps 250 volts AC. • YOUR PRODUCT IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THE PRODUCT. 1. Flymo Mains Cables and Extension Cables are available from your local Approved Service Centre. 2. Do not wire an extension cable directly to your product yourself. Please contact your local Approved Service Centre for further information on the connectors and kits available. 3. Only use extension cables specifically designed for outdoor use. CONNECTORS - IMPORTANT • Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products. • All Flymo connectors and cables are of splashproof construction. They are not waterproof and must not be left outside permanently nor should they be submerged or immersed in water. Do not let cable lay or trail through pools of water or splashed with water from hose pipes. 1. No earth required. Flymo products are double insulated to EN60335 and under no circumstances should an earth be connected to any part of the product. 2. Ensure the mains voltage suits your product 3. IMPORTANT! The wires in the mains lead are coloured in accordance with the following code: BLUE -NEUTRAL BROWN -LIVE The wire which is coloured BLUE must be connected to the Terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the Terminal which is marked with the letter 'L' or coloured RED. 4. It is important that the outer sheath is clamped correctly into the 3-pin plug. 5. If in doubt consult your local Service Repairer or qualified electrician before the machine is used. 6. A 13 Amp fuse must be fitted to the Mains Plug. 7. The normal plug fuse and household fuse only protect the electrical equipment and are not a safeguard against electrocution. If your product is hard wired i.e. non-detachable mains electric cable, a conversion kit and exten- MAINS PLUG REPLACEMENT - IMPORTANT • If the plug supplied is cut off it should be destroyed. sion cable is available from all Approved Service There is an electric shock hazard if a cut off plug is in-Centres which can be found in your local Yellow serted into a 13 amp socket. Pages. A • The Loose Parts Pack is packaged underneath the deck. Assembly of Lower Handles to Deck 1. Place the bolt (A2) through the hole in the lower handle (A1) until the lower handle fits into the recess (A3) 2. Place the washer (B1) and the wing knob (B2) on to the bolt and tighten the wing knob. 3. Repeat on the other side. Assembly of Upper Handles to Lower Handles. 1. Ensure the upper handle is located correctly with the lock-off button on the switchbox uppermost. 2. Ensure the upper handle (C1) and the lower handle (C2) are aligned correctly. 4. Fit the bolts (C3), washers (C4) and wing knobs (C5). Tighten the wing knob. 5. Fit the cable to the handles with the clips provided. Make sure the cable is not trapped between the upper and lower handles. Grassbox Assembly 1. Slide the grassbox tongue into the slots in the grassbox lower until it clicks securely into position (D) 2. Push the grassbox handle into the slots in the grassbox upper until...

Download now

Please, enter two numbers from picture: