Votes - 3, Average rating: 4.3 ( )

Manafacture: Classen File size: 2.29 mb File name: Language of manual:

3. Weight bar installed. 4. Gas lever on engine turned on. 5. All lubrication points greased. 6. 6:1 gearbox oil level. 7. Engine oil level. 8. Air cleaner. 9. Touch up scratches. 10. Chain(s) tight. 11. Lowering handle working properly. 12. Control handle(s) working to tighten V-belt(s). 13. Add fuel, start engine, test run. DATE SET UP __________/__________/__________ DELIVERY CHECK LIST Review the operators manual with the customer. 1. Classen Mfg., Inc. warranty. 2. Safe operation and service. 3. How to use controls. 4. Operating the machine correctly. 5. Transporting the Aerator. 6. Correct fuel and lubricants. 7. Daily and periodic inspections. 8. Changing oil after break-in period. 9. Servicing the Aerator regularly and correctly. 10. Classen Mfg., Inc. parts and service. 11. Give the customer the operators manual and encourage customer to read it. DATE DELIVERED __________/__________/__________ SIGNATURE _______________________________________ SAFETY PRECAUTIONS TRAINING 1. Regard the unit as a piece of power equipment and teach this regard to all who operate this unit. 2. Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. 3. Never allow children, teenagers or people unfamiliar with these instructions to use this piece of equipment. 4. Avoid operating unit while people, especially children or pets, are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. 5. Be sure you know how to stop the Aerator at a moments notice. PREPARATION SAFETY 1. The use of personal protective equipment, such as (but not limited to) protection for the eyes, ears, feet and head is recommended. 2. While operating, always wear substantial foot wear and long trousers. Do not operate the equipment when barefoot or wearing open sandals. 3. Area should be free of all obstacles and debris. ENGINE SAFETY 1. Handle gasoline with care; it is highly flammable. 2. Use an approved gasoline container. 3. Always add fuel before starting the engine. 4. Fill the fuel tank outdoors. 5. If fuel is spilled, do not attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated. WARNING DO NOT FILL TANK COMPLETELY FULL. DO NOT SMOKE WHILE YOU FILL FUEL TANK. DO NOT REMOVE GAS CAP IF ENGINE IS RUNNING. DO NOT OPERATE ENGINE IN A CONFINED SPACE WHERE DANGEROUS CARBON MONOXIDE FUMES CAN COLLECT. OPERATIONAL SAFETY 1. Carefully read and follow all caution decals. (See Pg. 5.) 2. Operate only in daylight or good artificial light. 3. Do not operate machine unless all guards, shields and covers are in place and in proper working condition. 4. It is essential all operator safety mechanisms be connected and in operating condition prior to use. 5. Do not change the engine governor settings or over- speed the engine. Operating an engine at excessive speed may increase the hazard of personal injury. 6. Disengage the drive control(s) and tine lowering handle before starting. (See Pg. 3, Fig 1.) 7. Start the engine carefully with feet well away from the tines. 8. Do not put hands, feet or clothing near rotating parts while the unit is being operated. 9. Travel up and down slopes at a 45 degree angle rather than across, to prevent unit from tipping over. 10. Exercise extreme caution when changing direction on slopes. Do not get too close to sharp drop-offs or operate unit on excessively steep slopes. DO NOT release control handle(s) on a slope, this will cause free wheeling, allowing unit to roll back down the slope. Make sure to leave yourself room to correct the problem if one arises. 11. Use caution when pulling the unit towards you. 12. Always stop the tines if unit has to be tilted for transportation or when crossing surfaces (i.e. sidewalks, driveways, stepping stones, etc.). 13. Never pick up or carry an Aerator while the engine is running. 14. Stop the engine and disconnect the spark plug wire: a) before checking, cleaning or working on unit, and b) after striking a foreign object (inspect the unit for damage and make repairs before restarting and operating). 15. Stop the engine: a) whenever you leave the unit, b) before refueling, and c) before clearing blockages. 16. Reduce the throttle setting during engine run-out and, if the engine is provided with shut-off valve, turn the fuel off at the conclusion of operating. OPERATION PREPARATION 1. Carefully read this manual and operate Aerator correctly. 2. Always check machine on level ground. 3. Visually check all moving parts and all fasteners, if loose or broken, tighten or replace. Check for broken or bent tines, replace if necessary. 4. Lubricate all fittings after every four hours of using machine, using a pressurized gun with standard lithium base lubricant (see “General Maintenance” section). Wipe off fittings before and after lubricating. 5. Check engine crankcase and gear reduction case oil le...

Download now

Please, enter two numbers from picture: