Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
4 Press v/V to select [Format internal memory] and then press . The confirmation screen used for initializing the internal memory is displayed. 5 Press v/V to select [Yes], then press . Notes • When the message [Cannot delete a protected image.] appears on the screen, the image file was set to Read Only on a computer. In this case, connect the photo frame to a computer, and delete this file using the computer. • The total capacity of the internal memory is not equal to the remaining capacity, even immediately after initialization. • If deletion has started, the deleted image cannot be recovered even if you stop deletion. Delete images only after confirming you actually want to delete them. 36 GB Tips • You can also use the MENU button on the photo frame. • You can enlarge or reduce the image when you select the index image display. Registering a mark You can produce a slideshow only with images which have been selected beforehand and have been marked. You can easily check for images with marks using the index image display or single view mode. 1 Press MENU when an image is displayed on the screen. The menu is displayed. 2 Press B/b to select the (Editing) tab. The screen used for editing is displayed. 3 Press v/V to select [Marking] and then press . 4 Press v/V to select the mark you want and then press . 5 Press v/V to select [Mark this image], [Selected images] or [Mark all images] and then press . If you select [Mark this image], the image currently displayed will be marked and showed in the future. Go to step 7. (This item cannot be selected on the slideshow display.) If you select [Selected images], you can select the image to which you want to attach a mark from the image list. Go to step 6. If you select [Mark all images], the image list is displayed. A check mark is attached Continued 37 GB Advanced operations to the check box of all the images. Go to step 7. 6 Specify the image to which you want to attach a mark from the image list. About the image list During a search: Displays all the images applicable to the criteria used for the search. Other than during a search: Displays all images in the device. Refer to “Searching for an image (Filtering)” (page 39). 1Press B/b/v/V to select the image to which to attach and then press . A check mark will be attached to the image. Repeat this operation to attach a mark to multiple images at the same time. To cancel the selection, select an imeges you want to cancel and then press to remove the check mark from the check box. 2A mark will be attached to the image for which a check mark has been placed in the check box. If a check mark is removed from the check box of an image, the mark will be removed from the image. 7 Press v/V to select [Yes] and then press . The mark is attached to the selected image. To delete the registration of a mark Select [Unmark this image] or [Unmark all images] and then press in step 5. You can also cancel the selection when you remove the check mark from the check box. [Unmark this image]: Removes a mark from the image currently displayed. (This item cannot be selected on the slideshow display.) [Unmark all images] During a search: Removes a marks from all the images applicable to the criteria specified in the search. Other than during a search: Removes all marks from all images stored on the device displayed. Note A mark is saved only when it is registered with an image in the internal memory. A mark registered with an image on a memory card or an external device is removed when the power is turned off, or if you change the device being displayed. Tips • You can select a mark from among 3 types. • You can also use the MENU button on the photo frame. • You can enlarge or reduce the image when you select the index image display. 38 GB Searching for an image (Filtering) Searching for an image (Filtering) 1 Press MENU when an image is displayed on the screen. The menu is displayed. 2 Press B/b to select the (Editing) tab. The screen used for editing is displayed. Note You cannot select the (Editing) tab when the clock and calendar are displayed. 3 Press v/V to select [Search] and then press . 4 Press v/V to select the criteria you want and then press . • [Search by date]: Filters by the date. • [Search by folder]: Filters by the folder. • [Search by vertical/horizontal]: Filters by the image orientation. • [Search by mark]: Filters by the mark. 5 Press v/V to select the item you want and then press . To cancel the search for an image Press the MENU button when an image is displayed on the screen and then select [Exit search (show all photo)]. To change the criteria for a search Press the BACK button when an image you searched for is displayed on the screen. Notes • Do not turn off the power, remove the memory card, or disconnect the external device during a searching. Doing so may damage the photo frame or memory card, or damage the data. • The search is cancelled automatically in the following cases. – When you change the playback d...
Other models in this manual:Photo Frames - DPF-D82 (10.67 mb)