Votes - 3, Average rating: 3.3
(
)
)
|
Other manuals for this model:
manual abstract
[ Notes on the LCD screen and lens • The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording. • When the battery level becomes low, the lens might stop moving. Insert a charged battery pack and turn on the camera again. [ On image data compatibility • The camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). • Sony does not guarantee that the camera will play back images recorded or edited with other equipment, or that other equipment will play back images recorded with the camera. [ Warning on copyright Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. [ No compensation for damaged content or recording failure Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc. Getting started Checking the accessories supplied • Battery charger BC-CSGB/BC-CSGC (1) • Power cord (mains lead) (1) (not supplied in the USA and Canada) • Rechargeable battery pack NP-BG1 (1)/ Battery case (1) • USB, A/V cable for multi-use terminal (1) •Strap Wrist strap (1) (DSC-W110/W115/W120/ W130) Neck strap (1) (DSC-W125) • Soft carrying case (1) (DSC-W115/W125 only) •CD-ROM (1) – Cyber-shot application software – “Cyber-shot Handbook” – “Cyber-shot Step-up Guide” • Instruction Manual (this manual) (1) Attach the strap and place your hand through the loop to prevent the camera from damage by being dropped. Hook 1 Preparing the battery pack CHARGE lamp Plug CHARGE lamp Power cord (mains lead) For customers in the USA and Canada For customers in countries/regions other than the USA and Canada 1Insert the battery pack into the battery charger. 2Connect the battery charger to the wall outlet (wall socket). The CHARGE lamp lights up, and charging starts. When the CHARGE lamp turns off, charging is finished (Normal charge). If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer. [ Charging time Full charge time Normal charge time Approx. 330 min. Approx. 270 min. • The table above shows the time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. • See page 30 for the number of images that can be recorded. • Connect the battery charger to the nearest wall outlet (wall socket). • Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. • Designed for use with compatible Sony batteries. 2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) With the terminal side facing the lens, insert the “Memory Stick Duo” until it clicks into place. Battery/“Memory Stick Duo” cover Insert the battery pack while pressing the battery eject lever with the tip of the battery pack. 1Open the battery/“Memory Stick Duo” cover. 2Insert the “Memory Stick Duo” (not supplied). 3Insert the battery pack. 4Close the battery/“Memory Stick Duo” cover. [ When there is no “Memory Stick Duo” inserted The camera records/plays back images using the internal memory (approx. 15 MB). [ To check the remaining battery charge Press POWER to turn on and check the remaining battery charge on the LCD screen. Remaining charge indicator Status Sufficient power remaining Battery almost fully charged Battery half full Battery low, recording/ playback will stop soon. Change the battery with fully charged one, or charge the battery. (The warning indicator flashes.) • If you use the NP-FG1 battery pack (not supplied), the minutes also appear after the battery remaining indicator ( 60 Min). • It takes about one minute until the correct remaining charge indicator appears. • The remaining charge indicator may not be correct depending on conditions of use and circumstances. • The Clock Set screen appears when you turn on the camera for the first time (page 13). [ To remove the battery pack/“Memory Stick Duo” Open the battery/“Memory Stick Duo” cover. “Memory Stick Duo” Battery pack Make sure that the access lamp Slide the battery eject lever. is not lit, then push the “Memory Be sure not to drop t...
Other models in this manual:Cameras & Photo - DSC-W110 (2.74 mb)
Cameras & Photo - DSC-W115 (2.74 mb)
Cameras & Photo - DSC-W120 (2.74 mb)
Cameras & Photo - DSC-W130 (2.74 mb)