Votes - 1, Average rating: 4
(
)
)
|
Other manuals for this model:
Cameras & Photo - DSC-W12 (4.85 mb)
Cameras & Photo - DSC-W12 (4.71 mb)
manual abstract
CPU: iMac, eMac, iBook, PowerBook, PowerMac G3/G4 series Memory: 128 MB or more (256 MB or more is recommended.) Hard Disk: Disk space required for installation: approximately 250 MB Display: 1024 . 768 dots or more, 32,000 colors or more • QuickTime 4 or later must be pre-installed at the factory. (QuickTime 5 is recommended.) • Operations are not guaranteed for all the recommended computer environments mentioned above. 1 Turn on your computer. • The display settings should be 1024 . 768 dots or higher and 32,000 colors or higher. 2 Insert the CD-ROM (supplied) into the CD-ROM drive. 3 Double-click the CD-ROM icon. 4 Copy the [IMXINST.SIT] file in the [MAC] folder to the hard disk icon. 5 Double-click the [IMXINST.SIT] file in the copy-to folder. 6 Double-click the [ImageMixer VCD2_Install] extracted file. 7 After the user information screen appears, enter the desired name and password. The installation of the software starts. b Creating a video CD 1 Open the [ImageMixer] folder in [Application]. 2 Click [ImageMixer VCD2]. 3 Click [Video CD]. The Video disc mode starts up. • You cannot create a DVD Video. images are stored. 1 Select the desired folder on the left frame, then click [Add]. The selected folder moves to the right frame. 2 Click [Next]. 5 Set up the menu background, buttons, titles, and so on, then click [Next]. Confirm the set up according to your preferences. 6 Confirm the preview of the Video CD file. 1 Click the file you want to preview on the left frame. 2 Click [B] to preview the file. 7 Click [Next] and enter the disk name and its destination. The preparation for storing the file on a CD-R is completed. • “ImageMixer VCD2” can create only the disk image to store the image file on a CD-R in the video CD format. Toast by Roxio (not supplied) is required to create a video CD. Enjoying images on your computer Troubleshooting If you experience trouble with your camera, try the following solutions. 1 First check the items on the tables below. If code displays “C:ss:ss” appear on the screen, the self- diagnosis display function is working (page 108). Battery and power 2 Should your camera still not work properly, press the RESET button on the bottom of the camera using a fine-tipped object, then turn on the power again. (All the settings including date and time are cleared.) RESET button 3 Should your camera still not work properly, consult your Sony dealer or local authorized Sony service facility. Symptom Cause Solution The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out soon. • You have used the camera in an extremely cold location. • The batteries are discharged. • The battery contacts or the terminals on the battery cover are dirty. • The memory effect has occurred in the Nickel- Metal Hydride batteries (page 12). • A deviation has occurred in the remaining battery time. • The batteries are dead (page 119). p See page 116. p Install charged batteries (page 13). p Wipe any dirt off from them with a dry cloth (page 13). p Charge tha batteries only after using up the existing charge to correct it. p Charge the batteries only after using up the existing charge so that the battery remaining indicator functions correctly (page 14). p Replace the batteries with new ones. The battery runs down too quickly. • You have used the camera in an extremely cold location. • The batteries are not charged enough. • The batteries are dead (page 119). p See page 116. p Charge the batteries (page 11). p Replace the batteries with new ones. Symptom Cause Solution You cannot turn on the camera. • The batteries are not installed correctly. • The AC Adaptor (not supplied) is disconnected. • The batteries are discharged. • The batteries are dead (page 119). p Install the batteries correctly (page 13). p Properly connect the AC Adaptor (page 16). p Install charged batteries (page 13). p Replace the batteries with new ones. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the batteries (page 17). • The batteries are discharged. p Turn on the camera again (page 17). p Install charged batteries (page 13). Shooting still images/movies Symptom Cause Solution The LCD screen is not turned on even when the power is turned on. • The power was turned off with the LCD screen turned off the last time you used the camera. p Turn on the LCD screen (page 32). The subject is not visible on the LCD screen. • The mode dial is set to SET UP or . p Set it to other modes than SET UP or (page 10). The LCD screen turns blue and the subject does not appear when recording movies. • The image size is set to [640(Fine)] while an A/V connecting cable is connected to the A/V OUT (MONO) jack. p Disconnect the A/V connecting cable. p Set the image size to other than [640(Fine)]. The image is out of focus. • The subject is too close. • The mode dial is set t...
Other models in this manual:Cameras & Photo - DSC-W1 (2.41 mb)