Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
BC-CS2A/CS2B • Do not use an electrical transformer (travel converter), as this may cause a malfunction. Turning your camera on/off POWER POWER lamp , Press POWER to turn on the power. The POWER lamp lights in green and the power is on. When you turn on the camera for the first time, the Clock Set screen appears (page 18). To turn off the power Press POWER again, the POWER lamp goes out, and the camera turns off. • When you turn the power on with the mode dial not set to SET UP or , the lens begins to move. Please be careful not to touch the lens. • Do not leave the camera with the lens portion pulled out by removing the batteries or AC Adaptor (not supplied), etc., for a long time. This may cause a malfunction. The Auto Power Off function If no tasks are performed for about three minutes when shooting, viewing images, or setting up the camera while using the batteries, power is automatically shut off to preserve battery power. However, in the following circumstances, even if the batteries are being used to power the camera, the Auto Power Off function will not work. • Movies are being played back • A slide show is being shown • A cable is connected to the (USB) jack or the A/V OUT (MONO) jack Getting started How to use the Setting the date and time control button SELECT Camera AF Mode: Digital Zoom: Date/Time: Red Eye Reduction: AF Illuminator: Single Smart Off Off Auto Review: Off Auto Cancel OK Setup 2 File Number: USB Connect: Video Out: Clock Set: 1 Mode dial 2 Clock Set 2004 11/ / D/M/Y M/D/Y Y/M/D 00 AM OK Cancel 12 : To change the current settings of the camera, bring up the menu or the SET UP screen (pages 46, 47), and use the control button to make the changes. When setting up the menu, press v/V/b/B to select the item or the setting and make the setting. When setting up the SET UP, press v/V/b/ B to select the item or the setting and press z to make the setting. , Set the mode dial to . • To set the time and the date again, set the mode dial to SET UP, select [Clock Set] in (Setup 2) (pages 47, 117), then proceed from Step 3. • You can carry out this operation even when the mode dial is set to P, M, , , , , , , . , Press POWER to turn on the power. The POWER lamp lights in green and the Clock Set screen appears on the LCD screen. Getting started 3 2004 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 12 : 4 2004 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 12 : 5 2005 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 10 : Getting started 3 2004 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 12 : 4 2004 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 12 : 5 2005 11/ / 00 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 10 : , Select the desired date format with v/V on the control button, then press z. You can select from [Y/M/D] (year/month/ day), [M/D/Y], and [D/M/Y]. • If the rechargeable button battery, which provides the power for saving the time data, is ever fully discharged (page 119), the Clock Set screen will appear again. When this happens, reset the date and time by starting from Step 3 above. , Select the year, month, day, hour, or minute item you want to set with b/B on the control button. v is shown above and V is shown below the selected item. , Set the desired numerical value with v/V on the control button, then press z. After setting the current numerical value, set the next item. Repeat Steps 4 and 5 until all of the items have been set. • If you select [D/M/Y] in Step 3, set the time on a 24-hour cycle. • 12:00 AM stands for midnight and 12:00 PM stands for noon. 6 2005 11/ / 30 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 10 : 6 2005 11/ / 30 AM Clock Set D/M/Y M/D/Y Y/M/D OK Cancel 10 : , Select [OK] with B on the control button, then press z. The date and time are set and the clock will start to keep time. • To cancel the setting process, select [Cancel], then press z. 20 Inserting and removing a “Memory Stick” 1 2 Label side Terminal side 3 Access lamp Shooting still images , Open the battery/“Memory Stick” cover. Turn up the battery/“Memory Stick” cover, and slide the cover in the direction of the arrow. • Be careful not to drop the batteries when opening or closing the battery/“Memory Stick” cover. • For details on “Memory Stick,” see page 119. , Insert the “Memory Stick.” Insert the “Memory Stick” all the way in until it clicks as shown in the illustration. • Whenever you insert a “Memory Stick,” push it as far as it can go. If you do not insert it correctly, a proper recording or playback may not be carried out. , Close the battery/“Memory Stick” cover. To remove the “Memory Stick” Open the battery/“Memory Stick” cover, then push the “Memory Stick” to pop it out. • Whenever the access lamp is lit, the camera is recording or reading out an image. Never open the battery/“Memory Stick” cover or turn off the power at this time. The data may be corrupted. Setting the still image size , Set the mode dial to and turn on the power. • You can carry out this operation even when the...
Other models in this manual:Cameras & Photo - DSC-P73 (3.1 mb)