Votes - 0, Average rating: 5
(
)
)
|
Other manuals for this model:
Cameras & Photo - MVC-CD300 (3.21 mb)
Cameras & Photo - MVC-CD300 (3.17 mb)
Cameras & Photo - MVC-CD300 (3.13 mb)
manual abstract
A malfunction may occur. You can use the version of DirectCD now installed on your computer. A USB connection between the camera and your computer cannot be established. Insert the disc directly into the drive of your computer. The finalization is not required. A USB connection between the camera and your computer cannot be established. Insert the disc that was finalized using the camera directly into the drive of your computer. DirectCD is not required to only view images on the finalized disc in a CD-ROM drive. If you read or write images on the disc which is not finalized, you have to connect the camera to your computer with the USB cable and install DirectCD into your computer. For details on USB connection, refer to the operating instructions of the camera. Install the supplied version of DirectCD on your computer without uninstalling the current version of DirectCD. To check the version of your DirectCD software Click in the following order: [Start] t [Program] t [Adaptec DirectCD] t [DirectCD Wizard]. You can check the version on the start up screen. When using a CD-RW • You cannot use the CD-RW which was formatted with other equipment than the camera. Format it with the camera again. • To view images on the CD-RW using a CD-ROM drive or CD-R drive, the drive must conform to the MultiRead type. • When using a CD-RW drive, you can use DirectCD in the same way you would be using a CD-R. Note You may not be able to use DirectCD depending on your CD-R drive or CD-RW drive. Installing DirectCD When connecting the camera to your computer using the USB cable, be sure to install the USB driver before connecting the USB cable. For details, refer to the operating instructions of the camera. E.g., for Windows Me users Follow these steps below to install DirectCD. English version illustrations are used in this manual. 1 Turn on your computer and insert the supplied CD-ROM (SPVD006) into the CD-ROM drive of your computer. The following window appears on the screen. Click here. If the window above is not displayed, start up “SETUP. EXE” in the CD-ROM. 2 Select the language. 3 Click [DirectCD]. The “Welcome” window appears on the screen. 4 Click [Next]. 5 Read the text on the window carefully, and if you accept it, click [Yes]. 6 Check the folder in which DirectCD will be installed. When you install DirectCD into another folder other than the default one, click [Browse...], and select the folder. 7 Click [Next]. The setup of the program starts. When the installation is complete, the screen returns to the window displayed in step 1. 8 Click [Exit]. The “Setup Complete” window appears on the screen. DirectCD will be available after you restart your computer. Check the option [Yes ...,] then click [Finish]. NoteonEasyCDCreator You cannot use Easy CD Creator with the camera connected to your computer with the USB cable. Using DirectCD You have to install the USB driver into your computer to connect the camera to your computer with the USB cable. Do not connect your camera to your computer before installing the USB driver. For details on the installation of the USB driver and on the directory, refer to the operating instructions of the camera. Note When you write new data onto the disc, before removing the disc from the camera, be sure to follow the procedure for removing the disc (page 12). If you remove the disc or disconnect the USB cable, without following the procedure, data on the disc may be broken. Starting DirectCD Do not initialize discs using DirectCD (this means that selecting [Format] from the DirectCD screen). Be sure to initialize discs using your camera. Initialization described in the operating instructions of the camera or selecting [Format] on the DirectCD screen is required for using a disc, however, these do not have compatibility each other. And “format” described in the operating instructions of the camera is to erase all the files in the CD-RW, and this is different from [Format] on the DirectCD screen. 1 After starting up your computer, insert a disc into the camera, and connect to your computer with the USB cable. to the USB connector USB cable to the USB jack Push the connector Computer as far as it will go 2 Turn on the camera and your computer. “DirectCD Disc Ready” appears on the screen. If this screen does not appear, double-click the CD icon on the Windows taskbar, in the lower corner of your screen. 3 Click [OK]. Writing data to a disc Once your disc is formatted as a DirectCD disc, you can write data to it in several different ways: • To drag and drop files from Windows Explorer onto the disc drive icon. • To select [Save As] from the File menu of a Windows application and select the driveletterofthe camera. • To use the [Send To] command. • To use MS-DOS command prompts from a DOS window in Windows. Notes • If the file name format of images does not correspond to the following format, DSC0ssss.JPG, you cannot play them back on the camera. For details, refer to the operating instruction...
Other models in this manual:Cameras & Photo - MVC-CD200 (677.2 kb)