Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
Do not attach the lens directly to the E-mount camera or you may damage both. Precautions for flash use When using a built-in camera flash, always remove the lens hood and shoot at least 1m (3.3 feet) away from your subject. With certain combinations of lens and flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. Vignetting When using lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. . Identifying the Parts 1...Focusing ring 2...Distance scale 3...Distance index 4...Lens contacts 5...Focus-mode switch 6...Mounting index . Attaching and Detaching the Lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. ..Do not press the lens release button on the camera when mounting the lens. ..Do not mount the lens at an angle. To remove the lens (See illustration .–..) While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching the Lens Hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Fit the lens hood into the mount on the end of the lens barrel and rotate the lens hood clockwise until it clicks into place. ..When using a built-in camera flash, remove the lens hood to avoid blocking the flash light. ..When storing, fit the lens hood onto the lens backwards. . Focusing When AF (Auto Focus) is selected, the camera focuses automatically. ..Do not touch the rotating focusing ring while the camera is focusing automatically. ..You cannot use the camera’s direct manual focus function with this lens. (Some cameras do not have a direct manual focus function. If your camera has this function, this restriction is explained in your camera’s instruction manual in the section on focusing). ..You cannot use the camera’s AF/MF button to control AF/MF with this lens. (Some cameras do not have an AF/ MF button. If your camera has this button, this restriction is explained in your camera’s instruction manual in the section on focusing). In MF (Manual Focus) mode, focus by rotating the focusing ring while looking through the viewfinder. (See illustration ..) ..The focus signal in the viewfinder indicates the current state of focus. To switch between AF (Auto Focus) and MF (Manual Focus) You can switch between Auto Focus and Manual Focus by using the focus-mode switch on the lens. Be sure to set the focusing mode switch (lever) on the camera to AF. ..For manual focusing, be sure to set the focus-mode switch on the lens to MF. Rotating the focusing ring forcibly without switching to MF may damage the focusing ring. Shooting at infinity in MF The focusing mechanism turns slightly past infinity to provide accurate focusing under various operating temperatures. Always confirm the image sharpness through the viewfinder, especially when the lens is focused near infinity. Specifications Name (Model name) 85mm F2.8 SAM (SAL85F28) Equivalent 35mm-format focal length*1 (mm) 127.5 Lens groups-elements 4-5 Angle of view 1*2 29° Angle of view 2*2 19° Minimum focus*3(m (feet)) 0.6 (2.0) Maximum magnification (.) 0.2 Minimum f-stop F22 Filter diameter (mm) 55 Dimensions (maximum diameter . height) (Approx., mm (in.)) 70 . 52 (2 7/8 . 2 1/8) Mass (Approx., g (oz)) 175 (6 1/8) *1 The equivalent 35mm-format focal length shown above is for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor. *2 The angle of view 1 is for 35mm-format cameras, and the angle of view 2 is for Interchangeable Lens Digital Cameras equipped with an APS-C size image sensor. *3 Minimum focus is the shortest distance from the image sensor to the subject. ..This lens is equipped with a distance encoder. The distance encoder allows more accurate measurement (ADI) by using an ADI-compatible flash. ..Depending on the lens mechanism, the focal length may change with any change of the shooting distance. The focal length assumes the lens is focused at infinity. Included items Lens (1), Front lens cap (1), Rear lens cap (1), Lens hood (1), Set of printed documentation Design and specifications are subject to change without notice. 4-199-189-02(1) ©2010 Sony Corporation Printed in Japan ...../ Interchangeable Lens/ Objectif interchangeable/ ...../Operating Instructions/Mode d’emploi/ Manual de instrucciones/ . . . . .................... .................... ............. ............................ ........................... ............................. ..................... ...................... ...........