|
Other manuals for this model:
manual abstract
2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. ..Do not press the lens release button on the camera when mounting the lens. ..Do not mount the lens at an angle. To remove the lens (See illustration .–..) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. ..A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM II. You can use the ALC-SH108 (sold separately). ..When storing, turn over the lens hood and place it onto the lens backwards. . Zooming Rotate the zooming ring to the desired focal length. . Focusing When using auto focus, the camera adjusts the focus automatically. ..While the camera is focusing automatically, do not touch the rotating focusing ring. ..The camera’s direct manual focus function cannot be used with this lens. (Some cameras do not have the direct manual focus function. If your camera has this function, this restriction is explained in the section on focusing, in your camera’s instruction manual.) ..You cannot switch between AF/MF mode with the AF/MF button on the camera. (Depending on the camera, the AF/ MF button may not exist. If your camera has this function, this restriction is explained in the section on focusing, in your camera’s instruction manual.) In MF (Manual Focus) mode, rotate the focusing ring while looking through the viewfinder, etc. (See illustration ..) To switch AF (Auto Focus)/MF (Manual Focus) mode You can switch between AF and MF with the focusing mode switch on the lens. Make sure to set the focusing mode switch (lever) on the camera to AF. ..Make sure to set the focusing mode switch to MF for manual focus. Do not rotate the focusing ring without setting to MF. Rotating the focusing ring forcibly without switching to MF may damage the focusing ring. To shoot a subject at infinite distance in MF mode The infinity position provides for some adjustment to compensate for focus shift caused by change in temperature. When shooting a subject at infinity in MF mode, focus by checking the viewfinder or other means. 4-455-773-01(1) Printed in Thailand Specifications Product name (Model name) DT 18-55mm F3.5-5.6 SAM II (SAL18552) Equivalent 35mm-format focal length*1 (mm) 27-82.5 Lens groups-elements 7-8 Angle of view*1 76°-29° Minimum focus*2 (m (feet)) 0.25 (0.82) Maximum magnification (X) 0.34 Minimum f-stop f/22-f/36 Filter diameter (mm) 55 Dimensions (maximum diameter . height) (approx., mm (in.)) 71.6 . 69 (2 7/8 . 2 3/4) Mass (approx., g (oz)) 222 (7 7/8) *1 The values shown above for equivalent 35mm-format focal length and angle of view are for Interchangeable Lens Cameras equipped with an APS-C sized image sensor. *2 Minimum focus is the shortest distance from the image sensor to the subject. ..This lens is equipped with a distance encoder. The distance encoder allows more accurate measurement (ADI) by employing a flash for the process. ..Depending on the lens mechanism, the focal length may change with any change in shooting distance. The focal lengths given above assume the lens is focused at infinity. Included items Lens (1), Front lens cap (1), Rear lens cap* (1), Set of printed documentation * The packaging lid is included instead if you purchase the lens as part of a kit. Design and specifications are subject to change without notice. is a trademark of Sony Corporation. Des informations relatives a l’utilisation de chaque objectif sont disponibles dans ce manuel. La section « Precautions avant toute utilisation », qui fait l’objet d’un document separe, contient des precautions relatives aux objectifs, telles que des remarques sur leur utilisation. Veuillez lire attentivement ces deux documents avant d’utiliser l’objectif. Cet objectif est concu pour une monture A, pouvant etre utilisee sur les appareils photo Sony . (modeles equipes d’un capteur d’image APS-C). Vous ne pouvez pas l’utiliser avec des appareils photos au format 35 mm. Remarques sur l’utilisation ..Lorsque cet objectif est utilise avec un appareil photo a monture E, rattachez un adaptateur pour monture d’objectif vendu separement. Ne rattachez pas directement l’objectif a l’appareil photo a monture E sinon l’objectif et l’appareil pourraient etre endommages. ..Si vous achetez un objectif de type DT 18-55mm F3.5-5.6 SAM II dans le cadre d’un kit, le capuchon d’objectif arriere standard ALC-R55 n’est pas inclus et est remplace par le couvercle d’emballage. ..Tenez fermement a la fois l’appareil photo et l’objectif lorsque vous transportez l’appareil photo avec l’objectif fixe. ..Ne tenez pas l’appareil par une partie saillante de l’objectif lors d’une operatio...