Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Numbers in parentheses indicate the time when you use a normally charged battery. 1) Recording at about 10 second intervals 2) Recording at about 15 second intervals 3) Playing back single image at about 10 second intervals • Battery life and No. of images will be decreased if you use the camera in a cold environment or while you repeat turning the power on/off. • Battery life and No. of images above are a guide with using some floppy disks. . Notes on remaining battery time indication Remaining battery time is displayed on the LCD screen*. However, the indication may not be displayed properly, depending on using conditions and circumstances. * During recording, remaining battery time is displayed while the power is on. During playback, it is displayed with the image on the LCD screen. . Auto power-off function During recording if you leave the camera inactive for about 3 minutes while the power is on, the camera turns off automatically to prevent wearing down the battery. 11-EN Step 3: Setting the date and time Function of the control button You can select an item in the menu which appears on the LCD screen by pressing the upper, lower, left or right side of the control button. When an item is selected, the color of the item changes from blue to yellow. To enter your selection, press the center of the control button. 2 1 Control button Upper side Left side Press to execute.Lower side Right side When you use the camera first With the floppy disk inserted (p. 15) and the power turned on, as in step 1, the clock set screen appears. If this occurs, follow the procedures from step 4. 1 Slide POWER down to turn on the power. If the “I” indicator appears on the LCD screen, replace the lithium battery according to the procedures on page 36. 12-EN 2 Select “MENU” with the control button, then press it. The menu appears on the LCD screen. To cancel menu screen, select “ RETURN” with the control button, then press it. –EV +EV MENU 3 Select “CLOCK SET” with the control button, then press it. O CLOCK SET BEEP FIELD/FRAME QUALITY RETURN CLOCK SET Y/M/D M/D/Y D/M/Y 1998 1 8 10: 20AM ENTER CANCEL 4 Select the desired display of the date with the control button, then press it. Y/M/D (year/month/day) M/D/Y (month/day/year) D/M/Y (day/month/year) 13-EN OStep 3: Setting the date and time 5 Select the date and time with the control button, then press it. The item to be changed is indicated with 4/$. Select number by pressing the upper side or lower side of the control button, then press it to enter the number. After entering the number, 4/$ moves to the next item. When “D/M/Y” is selected, set the time on a 24-hour cycle. CLOCK SET Y/M/D 1998 1 8 10: 20AM 6 Select “ENTER” with the control button, then press it at the desired moment to begin clock movement. To cancel setting the date and time Select “CANCEL” with the control button, then press it. 14-EN Recording images 3.5 inch, 2 HD (1.44 MB), MS-DOS format floppy disk is necessary for recording. BRIGHT (brightness of the6,7 Macro switch LCD screen) +/– button ACCESS lamp 4,5 3 2 1 DISPLAY button 1 Slide POWER down to turn on the power. 2 Set PLAY/CAMERA to CAMERA. The image captured by the lens and “NO DISK” appear on the LCD screen. 3 Slide OPEN in the direction of the arrow and open the floppy disk cover. The screen turns blue and “COVER OPEN” appears. 15-EN ORecording images 4 Insert the floppy disk until it clicks. Before inserting, check that the write protect tab set to the recordable position. 5 Close the cover. The image appears on the LCD screen. STD 11 –EV +EV MENU 120min Image quality indicator Remaining disk capacity indicator No. of recorded images AE lock indicator (Green) 6 Press the shutter button halfway down. The AE lock indicator r(green) appears on the LCD screen. AE (auto exposure) and AWB (auto white balance) are frozen. 7 Press the shutter button fully down. The image is recorded on the disk. The ACCESS lamp flashes, the remaining disk capacity indicator rotates and “RECORDING” appears on the LCD screen. Note When the ACCESS lamp is flashing, never shake or strike the unit. As well do not open the floppy disk cover, turn the power off or remove the battery pack. Otherwise, the image data breakdown may occur. 16-EN The number of images you can record on a floppy disk The number of images you can record is different depending on which image quality mode you select and subject complexity. STANDARD about 30 – 40 images FINE about 15 – 20 images Change the disk when the remaining disk capacity indicator is emptied and flashes. The image quality mode is set at the factory to STANDARD (p. 33). Notes • If you attempt to record 55 images or above, DISK FULL appears on the LCD screen and you cannot record the image even when the remaining disc capacity indicator is not emptied. • When the remaining disk capacity indicator flashes, image data cannot be recorded and INDEX screen may not be displayed. To remove the floppy disk Open the floppy disk cover and press E...