Votes - 4, Average rating: 5
(
)
)
|
Other manuals for this model:
Cameras & Photo - DSC-HX100V (7.89 kb)
Cameras & Photo - DSC-HX100V (1.28 mb)
manual abstract
When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50.F to 86.F). • Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect the power source. • When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket). • Be sure to use only genuine Sony brand battery packs, power cord (mains lead) and AC Adaptor (supplied). x Charging time The charging time is approximately 100 min. using the AC Adaptor (supplied). Note • The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. GB 15 x Battery life and number of images you can record and view x Battery life and number of images you can record and view Number of images Shooting still images LCD screen Approx. 205 min. Approx. 410 images Viewfinder Approx. 220 min. Approx. 440 images Shooting movies LCD screen Approx. 120 min. – Viewfinder Approx. 130 min. – Viewing still images Approx. 290 min. Approx. 5800 images Notes • The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. • The number of images that can be recorded is for shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). – [GPS setting] is set to [Off] (DSC-HX100V only). • The number for “Shooting still images” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – DISP (Display Setting) is set to [ON]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVC HD HQ – When continuous shooting ends because of set limits (page 27), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate. x Supplying power You can connect the AC adaptor (supplied) to power the camera from an wall outlet (wall socket). This way, there is no need to worry about draining the battery when shooting over extended periods or when the camera is connected to a TV or computer. Shooting and playback is possible without a battery pack in the camera. GB Inserting a memory card (sold separately) Ensure the notched corner faces Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover. • Closing the cover with the battery inserted incorrectly may damage the camera. x Memory cards that you can use Memory card For still images For movies A Memory Stick PRO Duo a a (Mark2 only) Memory Stick PRO-HG Duo a a Memory Stick Duo a — SD memory card a a (Class 4 or faster) B SDHC memory card a a (Class 4 or faster) SDXC memory card a a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Duo” media, and products in B are collectively referred to as SD card. GB 17 x To remove the memory card/battery pack x To remove the memory card/battery pack . Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 12) is lit. This may cause damage to data in the memory card/internal memory. Setting the clock ON/OFF (Power) button and Power/Charge lamp Control button Select items: v/V/b/B Set: z 1 Press the ON/OFF (Power) button. Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select the desired area following the instructions on the screen, then press z. 4 Set [Date & Time Format], [Daylight Savings] or [Summer Time] and [Date & Time], then select [OK] t [OK]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. GB 5 5 • The battery pack will run out quickly if you set [GPS setting] to [On] (DSC-HX100V only). 6 When an [In-Camera Guide] introductory message is appeared on the screen, select [OK]. GB Shooting still images/movies Mode dial Shutter button W: zoom out T: zoom in : Intelligent Auto : Movie Mode MOVIE GB 19 Shooting still images Shooting still images Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights. 2 Press the shut...