Votes - 3, Average rating: 3.7
(
)
)
|
Other manuals for this model:
manual abstract
• Selecting “E Tracking” can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction. Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the sixth Control Panel option from the top (ISO Sensitivity). 3. Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions ISO 64 Lower sensitivity Higher sensitivity Slow shutter speed Fast shutter speed (Set for shooting in dimly lit areas.) Less noise Some coarseness (increased digital noise) ISO 100 ISO 200 ISO 400 ISO 800 ISO 1600 • “AUTO” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting. • Higher ISO sensitivity values tend to result in digital noise in images. Snapshot Tutorial 38 Using the easy Mode Using the easy Mode The easy mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital imaging. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the third option from the bottom in the Control Panel (easy Mode). 3. Use [4] and [6] to select “| ON” and then press [SET]. This enters the easy mode. 4. Focus the image. While the focus frame is aligned with the subject, half-press the shutter button. 5. Shoot the image. When the image is focused, press the shutter button the rest of the way. This records the snapshot. . Using the easy Menu The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode. While the camera is in the easy mode, all the other settings (besides Flash, Self-timer, Image Size, and easy Mode) on the REC tab menu (page 128) and Quality tab menu (page 128) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode. Snapshot Tutorial 39 IMPORTANT! • To use the Set Up tab menu (page 129), you need to exit the easy mode. To do this, select the “easy Mode” item in step 2 of the following procedure, and then select l in step 3. After that, you can use the Set Up tab menu as you normally do. 1. Press [MENU]. The easy menu displays larger text than standard menus. 2. Use [8] and [2] to select the menu item you want, and then press [SET]. 3. Use [8] and [2] to select the setting you want, and then press [SET]. Menu Item: Available Settings: Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off) Self-timer • (10-second self-timer) / l* Image Size 1* / % / ! easy Mode k / l* Exit Menu Exit the easy menu • An asterisk (*) indicates reset default settings. • See the following for details. – Flash (page 34) – Self-timer (page 36) – Image Size (page 30) • The following are the settings you can select for “easy Mode”. To do this: Select this setting: Stay in the easy mode, without switching to another recording type k Switch from the easy mode to a standard recording type l • On-screen pop-up help text provides a brief explanation of each setting. Snapshot Tutorial 40 Using Face Detection (Face Detection) Using Face Detection (Face Detection) When shooting people, the face detection feature detects the faces of up to twelve individuals and adjusts focus and brightness accordingly. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the second Control Panel option from the bottom (Face Detection). 3. Use [4] and [6] to select “G Face Detection: On” and then press [SET]. 4. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5. Half-press the shutter button. The camera will focus and the frames around the faces it focuses on will turn green. 6. Press the shutter button the rest of the way down. IMPORTANT! • The camera performs center focus if it cannot detect a face. • The only focus mode available while face detection is enabled is Auto Focus (AF). • Face detection may take a bit longer when you hold the camera sideways. • Detection of the following types of faces is not supported. – Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade – A profile or a face that is at an angle – A face that is very far away and small, or very close and large – A face in an area that is very dark – The face of a pet or some other non-human subject • Face detection cannot be used in combination with any of the following features. – Some BEST SHOT scenes (For YouTube, Voice Recording) – easy Mode – Movie Recording • The following function is disabled when shooting with face detection. – Multi AF Snapshot Tutorial 41 Changing the Control Panel Date/Time Style Changing the Control Panel Date/Time Style 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time. NOTE • You can select either of two display style (page 109) for the date: Month/Day or Day/Month. • T...